Ethernet 設計與測試
Ethernet 標準（IEEE 802.3）已無所不在，共可分為10BaseT (10 Mb/s)、100BaseTX ( 100 Mb/s)、1000BaseT（250 Mb/s，4 條通道）雙絞線架構，一直到 10Gb/s 的光纖乙太網路。
如欲採用 10/100/1000M Ethernet 技術來設計產品，則須仔細分析每一項標準的特性，以達成相符性要求。如為 10 Gigabit Ethernet 標準，則設計人員須分析附屬單元介面（XAUI）的：XAUI由四個信號流組成，每個信號流速度為3.125Gb/s，組成10Gb/s的電子訊號，最後再成為10Gb/s的光學訊號。
IEEE 已制訂相關規格與相符性測試項目。本頁面提供之資源可協助您認識 Ethernet 設計、了解最新的量測技巧，並說明設計與除錯方式。
移除所有細分1-3 / 3
|
An Overview of the Electrical Validation of 10BASE-T, 100BASE-TX, and 1000BASE-T
The technology used in these ports, commonly known as “LAN” or “NIC” ports, is usually one of the 10BASE-T, 100BASE-TX, and 1000BASE-T standards or a combination of them.
應用手冊 2011-01-11 |
PDF
1.21 MB
|
|
Crossing the Digital-Analog Divide - White Paper
This white paper helps to better understand how to cope with the physical nature of signals that we might prefer to think of as bits, nibbles and bytes, let's start with an ideal digital waveform.
應用手冊 2012-05-02 |
PDF
6.46 MB
|
|
Testing 10 Gbit/s Ethernet Devices
The purpose of this anual is to assist you when you are setting up and executing tests for 10 Gbit/s Ethernet (10GbE) devices.
應用手冊 2003-02-21 |
PDF
959 KB
|
註冊myAgilent
註冊您的產品
為何選擇向安捷倫採購