RF & Microwave
For most of your RF & Microwave measurement needs, you can find application & solution information here.
Be sure to check the library of application notes for detailed information on using your equipment and successfully completing the measurements you need.
Refine the List
By Application
-
All Applications
- Impedance
By Type of Content
- Document Library
- Application Notes
- Application Note (5)
- Application Notes
By Product Category
-
All Product Categories
- Additional Test & Measurement Products
1-5 of 5
|
Evaluation of MOS Capacitor Gate Oxide C-V Characteristics Using the Agilent 4294A(PN4294-3)
As a result of extremely high integration of logic LSIs, MOS FETs with gate lengths of 0.1 mm or less have been produced recently. A consequence of this miniaturization has been the need for very thin gate oxide layers.
Application Note 2003-06-26 |
|
|
Impedance Measurement Handbook
Impedance measurements basics using Agilent Technologies' LCR meters and impedance analysers.
Application Note 2009-06-17 |
|
|
Measurement of Cable Characteristics (AN 30)
This Application Note is for information only. Agilent no longer sells or supports these products.
Application Note 1964-02-01 |
|
|
Multifrequency C-V Measurements of Semiconductors (AN 369-5)
The Agilent 4284A has a DC bias capability of +/- 40V and a wide frequency cover age of 20 Hz - 1 MHz, which enable us to make semiconductor C-V measurements.
Application Note 2008-12-10 |
|
|
Network, Spectrum, and Impedance Evaluation of Electronic Circuits and Components (AN 1308-1)
This Application Note describes how the Agilent 4395A/96B can be used to contribute fast cycle time for electronic circuit/component development.
Application Note 2001-12-19 |
|
