RF & Microwave
For most of your RF & Microwave measurement needs, you can find application & solution information here.
Be sure to check the library of application notes for detailed information on using your equipment and successfully completing the measurements you need.
Refine the List
By Application
-
All Applications
- Pulsed-RF Measurements
By Type of Content
- Document Library
- Application Notes
- Application Note (12)
- Application Notes
By Product Category
1-12 of 12
|
81100 Family of Pulse Pattern/Generators Radar Distance Test to Airborne Planes (PN 1)
This Product Note describes how a trigger pulse train of double pulses is sent from the control tower's radar system to an airplane.
Application Note 2004-10-12 |
|
|
81100 Family of Pulse/Pattern Generators the Dual Clock Gbit Chip Test (PN 2)
In this Product Note the principle is to deliver a variable clock to feed either your device(s), board(s) or instrument(s). Due to the two channel capability it is also possible to generate clocks which ...
Application Note 2004-10-18 |
|
|
8753/8720 Pulsed Measurements
The aim of this Product Note is to show that under certain conditions, network analyzers such as the Agilent 8720ES and 8753ES can produce good results at a much lower cost.
Application Note 2000-05-01 |
|
|
A New Technique for Pulsed RF Measurements (AN 120)
This Application Note is for information only. Agilent no longer sells or supports these products.
Application Note 1968-09-01 |
|
|
Active Device Characterization in Pulsed Operation Using the PNA-X AN 1408-21
This AN discusses pulsed S-parameter measurements using the PNA-X series and measurement techniques that enable power-dependent active device characterization including compression and distortion.
Application Note 2011-05-17 |
|
|
EPM-P Series Power Meters Used in Radar and Pulse Applications (AN 1438)
Application Note 2003-01-28 |
|
|
PNA - Pulsed Measurement Accuracy (1408-11)
Application Note 2004-02-17 |
|
|
PNA - Pulsed-RF S-Parameter Measurements Using Wideband and Narrowband Detection (AN 1408-12)
Application Note 2007-11-28 |
|
|
Pulsed Carrier Phase Noise Measurements (AN 1309)
This application note discusses basic fundamentals for making pulsed carrier phase noise measurements using Agilent E5500 phase noise measurement system.
Application Note 2000-05-01 |
|
|
Recent Advances in Pulsed RF and Microwave Frequency Measurements (AN 173)
This Application Note is for information only. Agilent no longer sells or supports these products.
Application Note 1974-10-01 |
|
|
Spectrum and Signal Analysis Pulsed RF Application Note 150-2
This application note is intended as an aid for the operation of spectrum and signal analyzers and the interpretation of the displayed pulse spectra.
Application Note 2012-07-05 |
|
|
Successful Modulation Analysis in 3 Steps
This application note presents a planned measurement & troubleshooting sequence consisting of 3 steps: (1) Frequency, frequency & time, (2) Basic digital mod. analysis, and (3) Advanced digital mod. analysis.
Application Note 2012-11-21 |
|
