RF 및 마이크로웨이브
1-12 / 12
|
81100 Family of Pulse Pattern/Generators Radar Distance Test to Airborne Planes (PN 1)
This Product Note describes how a trigger pulse train of double pulses is sent from the control tower's radar system to an airplane.
어플리케이션 노트 2004-10-12 |
|
|
81100 Family of Pulse/Pattern Generators the Dual Clock Gbit Chip Test (PN 2)
In this Product Note the principle is to deliver a variable clock to feed either your device(s), board(s) or instrument(s). Due to the two channel capability it is also possible to generate clocks which ...
어플리케이션 노트 2004-10-18 |
|
|
8753/8720 Pulsed Measurements
The aim of this Product Note is to show that under certain conditions, network analyzers such as the Agilent 8720ES and 8753ES can produce good results at a much lower cost.
어플리케이션 노트 2000-05-01 |
|
|
A New Technique for Pulsed RF Measurements (AN 120)
This Application Note is for information only. Agilent no longer sells or supports these products.
어플리케이션 노트 1968-09-01 |
|
|
Active Device Characterization in Pulsed Operation Using the PNA-X AN 1408-21
This AN discusses pulsed S-parameter measurements using the PNA-X series and measurement techniques that enable power-dependent active device characterization including compression and distortion.
어플리케이션 노트 2011-05-17 |
|
|
EPM-P Series Power Meters Used in Radar and Pulse Applications (AN 1438)
어플리케이션 노트 2003-01-28 |
|
|
PNA - Pulsed Measurement Accuracy (1408-11)
어플리케이션 노트 2004-02-17 |
|
|
PNA - Pulsed-RF S-Parameter Measurements Using Wideband and Narrowband Detection (AN 1408-12)
어플리케이션 노트 2007-11-28 |
|
|
Pulsed Carrier Phase Noise Measurements (AN 1309)
This application note discusses basic fundamentals for making pulsed carrier phase noise measurements using Agilent E5500 phase noise measurement system.
어플리케이션 노트 2000-05-01 |
|
|
Recent Advances in Pulsed RF and Microwave Frequency Measurements (AN 173)
This Application Note is for information only. Agilent no longer sells or supports these products.
어플리케이션 노트 1974-10-01 |
|
|
Spectrum and Signal Analysis Pulsed RF Application Note 150-2
This application note is intended as an aid for the operation of spectrum and signal analyzers and the interpretation of the displayed pulse spectra.
어플리케이션 노트 2012-07-05 |
|
|
Successful Modulation Analysis in 3 Steps
This application note presents a planned measurement & troubleshooting sequence consisting of 3 steps: (1) Frequency, frequency & time, (2) Basic digital mod. analysis, and (3) Advanced digital mod. analysis.
어플리케이션 노트 2012-11-21 |
|
