Parla con un Esperto

Technical Support

Test e Misura

Find by Product Model Number: Examples: 34401A, E4440A

226-250 of 1773

Sort:
Does Agilent have a recommended solution for inspecting the output ferrules?
Agilent does not offer a visual ferrule inspection tool as part of its' product line.

FAQ 2011-07-06

Why can't I acquire the license key?
To rely on the CPU- ID remove the network-card before installing the PFL.

FAQ 2011-07-05

Can I use the 815xx Modules with the newer 816x mainframes? What are the trade-offs?
The 815xx modules will operate in the 8163 and 8164 mainframe, but NOT in the 8166 mainframe.

FAQ 2011-07-05

What is the rack mount kit for the 8169A polarization controller?
Below is a list of rack mount part numbers for the 8169A. Note that the 8169A is a full width mainframe.

FAQ 2011-07-05

What is the calibration cycle for the interface modules?
The 81618A/81619A interface modules do not require calibration.

FAQ 2011-07-05

When upgrading my 816xB mainframe using ATTools, my computer reports "Cannot initialize serial port ...
A background task, such as hot synchronization, may be using the serial port.

FAQ 2011-07-05

How do I interpret the binary data which is retrieved over the GPIB from the Stability/Logging application?
The data has the following format ...

FAQ 2011-07-05

How much hysteresis does the power control loop of the 81566A/67A show?
There are two threshold levels (if power control is active).

FAQ 2011-07-05

Will the 8164A mainframe print in color?
The 8164A will not print in color to an external printer.

FAQ 2011-07-05

Can I use the newer 816xx modules in the older 8153A mainframe?
The new 816xx modules will NOT operate in the older 8153A mainframe.

FAQ 2011-07-05

What is the difference between the FETCH and the READ command to get the data from the power modules?
The FETCH and READ command will both acquire a power reading from the mainframe.

FAQ 2011-07-05

How is the 8169A different from the 11896A polarization controller?
The 8169A Provides polarization synthesis relative to a built-in linear polarizer.

FAQ 2011-07-05

Is the power control loop of the 81566A/67A also working for signal packets?
Yes, the averaging time of the 81566A/67A has to be adjusted to a time significantly longer than ...

FAQ 2011-07-05

How can I link the 8164A with the 8166A?
The mainframes can be linked together with a GPIB cable, where a remote PC takes the control ...

FAQ 2011-07-05

Should I use a Germanium (Ge) or a Indium Gallium Arsenide (InGaAs) optical head?
An important difference between Ge and InGaAs is the shape of the spectral responsivity curves.

FAQ 2011-07-05

Is there a replacement product for the E5574A Optical Loss Analyzer?
Please contact your Agilent representative to discuss a configuration for your particular application.

FAQ 2011-07-05

I need to operate four compact modules. Can I use the 8164 mainframe without a large slot tunable laser?
Yes, the 8164 mainframe can operate without a large slot tunable laser (81640A/642A/680A/682A/81480A).

FAQ 2011-07-05

What happens if the power unit is changed from dBm to Watt or vice versa?
All dependent parameters are automatically converted accordingly so all features remain fully functional.

FAQ 2011-07-05

What is the calibration cycle for the 816x mainframes?
The 816x mainframes do not require calibration.

FAQ 2011-07-05

What kind of power sensor is used in the 81566A/67A?
The 81566A/67A uses an InGaAs photodiode, similar to Agilent's 81632A power sensor module.

FAQ 2011-07-05

Can I use both PC and APC connectors with the optical heads?
Yes, you can use both straight (PC) and angled (APC) fiber with the Agilent Technologies optical heads.

FAQ 2011-07-05

Can I use the 816xx series modules in any of the 816x mainframes?
The compact modules will operate in any of the 816X mainframes. However, the large slot tunable ...

FAQ 2011-07-05

Is there an electrical extender cable available for the 8162xA/B optical heads?
The model number of this cable, with a length of 4 meters, is 81624CE.

FAQ 2011-07-05

Does the parameters 'averaging time' and 'speed' influence the power control loop of the 81566A/67A?
The user selected averaging time is effective for all internal power measurements...

FAQ 2011-07-05

I need to perform return loss measurements on multimode cable. Will 8161x RTL modules allow me to do so?
Specifications are not valid if using a multimode cable.

FAQ 2011-07-05

Previous 1 2 3 4 5 6 7 8 9 10 ... Next