Contact an Expert

Technical Support

Test & Measurement

Find by Product Model Number: Examples: 34401A, E4440A

101-125 of 234

Sort:
How do I change the power meter's system model number (E4418A or E4419A) to be the same as the physical model number (E4418B or E4419B) ?
To change the power meter's system model number from E4419A to E4419B and from E4418A to E4418B, use the following SCPI command:….

FAQ 2008-10-16

Why is the battery life of the U1253A Handheld Digital Multimeter (DMM) typically shorter than the battery life of the U1251A/U1252A?
The battery life of the U1253A Handheld Digital Multimeter (DMM) is typically shorter because its display brightness is set to the highest….

FAQ 2008-10-09

ESA-L1500A: Spectrum Analyzer 12 Vdc Operation

FAQ 2008-10-08

ESA Series L1500A: Spectrum Analyzer Model and Product Numbers

FAQ 2008-10-08

ESA Series L1500A: IF Relay Lifetime

FAQ 2008-10-08

Why is the 50 MHz reference calibration not required for the U2000 Series USB Power Sensors?
The U2000 USB Power Sensors do not require a 50MHz reference calibration because their cable lengths and sensor/meter pairings are fixed….

FAQ 2008-09-25

Is the Universal Serial Bus (USB) interface a good choice for data acquisition applications?
The Universal Serial Bus (USB) interface is ideal for data acquisition applications because USB offers plug-and-play capabilities….

FAQ 2008-09-25

Do terminal blocks and SCSI cables come with the USB data acquisition (DAQ) devices?
No, terminal blocks and SCSI cables do not come with the USB data acquisition (DAQ) devices....

FAQ 2008-09-25

How long would the battery of the U1252A Handheld Digital Multimeter last if I perform continuous datalogging?
If you perform continuous datalogging, the fully-charged NiMH battery of the U1252A Handheld Digital Multimeter will last for 36 hours....

FAQ 2008-09-25

Why does "National Instruments" appear as the manufacturer of the U2000 Series USB Power Sensors in the Device Properties?
"National Instruments" will appear as the manufacturer of the U2000 Series USB Power Sensors if the Agilent IO Libraries is not installed. …

FAQ 2008-09-25

Can the U2802A Thermocouple input device work with all the USB Data Acquisition (DAQ) models?
No. The U2802A Thermocouple input device can only be used with the U2355A or U2356A USB data acqusition (DAQ) model.

FAQ 2008-09-25

Can I use D-type linearity to calibrate the V8486A Power Sensor?
Yes, you can use D-type linearity to calibrate the V8486A Power Sensor....

FAQ 2008-09-25

How long can the batteries of the U1241A or U1242A Handheld Digital Multimeter last?
The batteries that are supplied with the U1241A or U1242A Handheld Digital Multimeter can last for more than 200 hours under normal use.

FAQ 2008-09-24

Can I use regular AAA batteries in the U1241A and U1242A Handheld Digital Multimeters?
Yes, you may use regular AAA batteries for the U1241A and U1242A Handheld Digital Multimeters….

FAQ 2008-09-24

Are there any sample programs provided for the U2300A and U2500A Series Data Acquisition (DAQ) devices?
Yes, sample programs of VEE, LabView and Microsoft® Visual Studio® are available for the U2300A and U2500A Series Data Acquisition (DAQ)….

FAQ 2008-09-24

Can the 4339B be used for HIPOT (High-potential) tests?
No, the requirements of HIPOT tests are different from the insulation resistance tests and measurements.

FAQ 2008-09-11

Does the 4338B carry CE mark?
Yes, the 4338B carries the CE mark.

FAQ 2008-06-11

What conditions are applied to the use of E4980A-1CM Rack Mount Kit?
Following conditions are applied to rack mounting of the E4980A:

FAQ 2008-06-11

What are the criteria to be applied when choosing the instrument for C-V measurements from the 4294A and E4980A?
It depends on the size and the thickness of the gate oxide film of the device.

FAQ 2008-05-26

Is it possible to parallel more than 2 units of the 42841A to expand bias current output range?
No. Instrument does not have firmware to control more than 2 units of the 42841A. In addition, connecting more than 2 units of the 42841A may cause an "OVLD" status due to possible imbalance of DC bias source and sink currents.

FAQ 2008-05-26

What are the size, cable length and weight of the 42941A probe?
The 42941A has 15 cm long probe body, 1.5 m long cable and approximately 2.4 kg in weight.

FAQ 2008-05-20

Why is the 16008B furnished with an acrylic plate?
The 16008B is furnished with an acrylic plate to prevent the guard electrodes from being scratched when the 16008B is not in use.

FAQ 2008-05-16

How do I change Daylight Saving Time Settings on the ENA / ENA-L?
Agilent confirmed that Daylight Saving Time Setting can be changed with following procedure...

FAQ 2007-10-05

What hard copy manuals are included with option ABA for the ENA-L?

FAQ 2007-07-12

How long will the 8546A/2E instruments be supported?
Support life will end in March 2006

FAQ 2007-06-29

Previous 1 2 3 4 5 6 7 8 9 10 Next