Contact an Expert

Technical Support

Test & Measurement

Find by Product Model Number: Examples: 34401A, E4440A

Refine the List

remove all refinements

By Industry/Technology

By Type of Content

176-200 of 256

Sort:
Designing and Testing 3GPP W-CDMA User Equipment - Application Note
This Application Note focuses on the physical layer (layer 1) of the Frequency Division Duplex (FDD) mode of W-CDMA.

Application Note 2003-02-21

Making 802.11G Transmitter Measurements (AN 1380-4) - Application Note
This 12-page application note provides an overview of 802.11g WLAN technology and reviews the tests used to design and manufacture 802.11g transmitters and modulators.

Application Note 2003-02-21

Performance Comparison of Differential and Single-Ended Active Voltage Probes (AN 1419-03)
Explore performance and usability trade-offs for differential and single-ended probes.

Application Note 2003-02-14

Designing and Testing cdma2000 Mobile Stations - Application Note 1358
One of the proposals for the IMT-2000 requirements for a 3G global wireless communications system is cdma2000. This application note describes mobile station design and measurement issues at the physical layer (layer 1) that may be different between cdma2000 and cdmaOne.

Application Note 2003-01-13

Understanding Oscilloscope Frequency Response and Its Effect on Rise-Time Accuracy
Learn which type of frequency response offers the best measurement accuracy; there are two issues to consider, the maximum signal frequency, and the oscilloscope sampling alias errors

Application Note 2002-12-01

Improving Usability and Performance in High-Bandwidth Active Oscilloscope Probes (AN 1419-02)
Understand how to get minimal probe loading and highest-possible-performance representation of your signal.

Application Note 2002-11-01

Understanding GSM/EDGE Transmitter and Receiver Measurements for Base Transceiver Stations (AN 1312)
This 36-page application note presents the fundamental RF parametric measurements necessary to characterize GSM/EDGE base transceiver stations and their components.

Application Note 2002-08-24

Fundamentals of Signal Analysis Series (AN 1405-2)
This application note is a primerfor those who are unfamiliar with the class of analyzers we call dynamic signal analyzers. These instruments are particularly appropriate for the analysis of signals in the range of a few millihertz to about a hundred kilohertz.

Application Note 2002-08-06

Lowering Cost and Improving Interoperability by Predicting Residual BER (AN 1397-1)
This application note is intended for those who require a functioning knowledge of residual bit error rate (BER) in digital QAM (quadrature amplitude modulation) radio systems.

Application Note 2002-07-17

PDF PDF 1.98 MB
Fundamentals of Signal Analysis Series (AN 1405-1)
This Application Note is a primer for those who are unfamiliar with the advantages of analysis in the frequency and modal domains.

Application Note 2002-05-24

IEEE 802.11 Wireless LAN PHY Layer (RF) Operation and Measurement
This Application Note is written for people who need to get an overall understanding of the configuration and testing of WLAN devices. It gives a brief description of a Wireless LAN system with emphasis on the radio or physical layer.

Application Note 2002-04-15

Testing and Troubleshooting Digital RF Communications Receiver Designs (AN 1314)
This Application Note covers the fundamental measurement principles involved in testing and troubleshooting digital communications receivers, particularly those used in digital RF cellular systems. Measurement setups are provided for receiver performance tests and troubleshooting tips are given.

Application Note 2002-03-25

Testing and Troubleshooting Digital RF Communications Transmitter Designs (AN 1313)
This Application Note covers the following 3 topics: 1) How digital communications transmitters work, 2) Essential transmitter tests and important test equipment characteristics, and 3) Troubleshooting techniques for common impairments.

Application Note 2002-01-08

Network, Spectrum, and Impedance Evaluation of Electronic Circuits and Components (AN 1308-1)
This Application Note describes how the Agilent 4395A/96B can be used to contribute fast cycle time for electronic circuit/component development.

Application Note 2001-12-19

Low Voltage Differential Signaling, (AN 1382-6)
Using LVDS for High Speed Data Transmission

Application Note 2001-12-17

I/O Libraries Supported Interfaces - Application Note
IO Library

Application Note 2001-12-12

Insights into Proper Return Path Alignment
Return path alignment, maintenance and management for Cable TV providers to deliver telephony and internet service to consumers.

Application Note 2001-12-01

Spectral Analysis Using a Deep Memory Oscilloscope FFT (AN 1383-1))
Many of today's digital oscilloscopes include a Fast Fourier Transform (FFT) for frequency-domain analysis. This feature is especially valuable for oscilloscope users who have limited or no access to a spectrum analyzer yet occasionally need frequency-domain analysis capability. An integrated...

Application Note 2001-11-15

Spectrum Analysis: Amplitude and Frequency Modulation (AN 150-1)
Modulation is the act of translating some low-frequency or base-band signal (voice, music, data) to a higher frequency. Why do we modulate signals? There are at least two reasons: to allow the simultaneous transmission of two or more baseband signals by translating them to different frequencies...

Application Note 2001-10-01

PDF PDF 1.23 MB
Investigating Bluetooth Modules: The First Step in Enabling Your Device with a Wireless Link
This Application Note is designed for vendors or manufacturers who plan to add a wireless link to their products by installing commercially-available, pre-built Bluetooth® modules into them.

Application Note 2001-09-30

Combining Network and Spectrum Analyses and IBASIC (AN 1288-1)
Active components (and now even some passive components like crystal filters require analysis to characterize linear parameters (gain/loss, phase and group delay or S-parameters) as well as non-linear performance. Non-linear analysis is typically related to measuring signal distortion generated...

Application Note 2001-08-30

Vector Signal Analyzers Open New Windows for Alcatel Space Industries Satellite Communications...
Alcatel uses the Agilent 89610 vector signal analyzer (VSA) with its Telecom Carrier Analyzer (TCA) because of its intuitive, easy-to-use Windows® interface and signal analyzer display facility.

Application Note 2001-05-24

PDF PDF 573 KB
Measuring Cable System Distortion
Discusses the key points of the NCTA Recommended Practices for Measurements on Cable Television Systems.

Application Note 2001-03-23

Cable Impedance and Structural Return Loss Measurement Methodologies
introduces exact definitions for cable impedance and structural return loss along with several measurement methodologies.

Application Note 2001-03-23

ESG (Revisions B.03.72, B.03.75 and B.03.80) Option 200 Compliance with 3GPP W-CDMA
The ESG signal sources can be used to generate the signals to perform many of the receiver characteristics and performance requirements measurements for user equipment and base stations as defined by the 3GPP standard.

Application Note 2001-03-01

PDF PDF 34 KB

Previous 1 2 3 4 5 6 7 8 9 10 ... Next