お問い合わせ窓口

テクニカルサポート

電子計測

製品モデル番号で検索: 例：34401A, E4440A

絞込み

絞込みのリセット

トピック

アプリケーション

コンテンツのタイプ

製品カテゴリ

26-50 / 976

並べ替え
Can I downgrade the instrument application software in my X-Series signal analyzer?
No, the instrument should never run instrument application software older than it was originally shipped with.

FAQ 2013-04-14

What is the external trigger delay and trigger jitter in zero span on the X-Series Signal Analyzers (PXA/MXA/EXA)?
Contributors to External Trigger delay and a link to the delay table found here...

FAQ 2013-03-29

How do I upgrade my N9322C Basic Spectrum Analyzer
Find information on Hardware Upgardes, Instrument Software, Measement Applications, etc...

FAQ 2013-03-21

[仕様] どのモデルで113xA/116xAシリーズ InfiniiMax プローブをサポートしていますか？
WindowsXP搭載のモデルであれば、問題なく使えます。Windows95/98搭載モデルでは、使用できないこともございます。

FAQ 2013-03-18

機能拡張された工場校正をEXAで行うことはできますか？PXA/MXA/PSAでしか行えないのでしょうか？
行えません。EXAでは評価されていません。

FAQ 2013-03-12

How can I install E4444A Benchlink Spectrum Analyzer Connectivity Software on a Windows 7 computer?
E4444A Benchlink was designed to work with Windows XP, but it is possible to run it on Windows 7 by using the optional Windows XP Mode Virtual PC.

FAQ 2013-02-28

What hardware platforms are no longer supported by the 89600 VSA software?
A list of discontinued hardware by version number

FAQ 2013-02-14

Can I use noise floor extension (NFE) with real-time?
No, you cannot use noise floor extension with real-time.

FAQ 2013-02-07

What option should I order to get RTSA in an existing N9030A PXA signal analyzer?
If you already have Option B1X, B1Y and MPB ...

FAQ 2013-02-07

How do I upgrade analysis bandwidth on an N9030A PXA Signal Analyzer?
Table describes each scenario...

FAQ 2013-02-07

Can I use external mixing (Option EXM) with real-time?
No, you cannot use external mixing (Option EXM) with real-time.

FAQ 2013-02-07

How can I tell if my instrument is licensed for Options B1X, B1Y, and MPB?
You can check to see what options are installed in your instrument by pressing the [System] hard key, then the {Show} soft key, then the {System} soft key.

FAQ 2013-02-07

Do the handheld spectrum analyzers have a memory clearing (security) feature?
Yes.

FAQ 2013-01-23

Unsigned assembly error with 89600 VSA software version 16.00
This FAQ descibes how to correct the unsigned assembly error with version 16.00

FAQ 2013-01-14

Can I upgrade the U8903A Audio Analyzer's firmware myself?
you can upgrade the U8903A Audio Analyzer's firmware yourself.

FAQ 2013-01-03

Which versions of Mathworks Simulink are compatible with 89600 VSA Software?
Compatible versions are listed here

FAQ 2012-12-14

Xシリーズ測定アプリケーションの無料試用ライセンス
Xシリーズ測定アプリケーションの14日間試用ライセンスを無料で入手できます。

FAQ 2012-12-12

Xシリーズ シグナル・アナライザの試用ライセンスのFAQ

FAQ 2012-12-11

10 MHz基準入力／出力を備えているAgilentオシロスコープは？
6000シリーズ、6000Lシリーズ、7000Aシリーズ、7000Bシリーズ、9000シリーズ、54850シリーズ（出力のみ）、80000Aシリーズ、80000Bシリーズ、90000Aシリーズ、90000 Xシリーズ

FAQ 2012-12-10

What Configuration issues are there with option AYQ, Quasi Peak Detector in the ESA-E Series of Spectrum Analyzers?
View the compatibility issues here....

FAQ 2012-12-05

ESA-Eシリーズ・スペクトラム・アナライザをアップグレードするには？
ここでは、ハードウェア・オプション、測定パーソナリティ、接続方法、ファームウェア・アップグレード、アナライザ・アクセサリに関する情報を提供します。

FAQ 2012-12-03

Does the microwave N9000A CXA signal analyzer support the 75 ohm input connector?
No, the 75 ohm input connector is not available on the microwave CXA.

FAQ 2012-11-30

Does the microwave N9000A CXA signal analyzer support the wideband IF output?
No, wideband IF output is not available on the microwave CXA.

FAQ 2012-11-30

Can the N9000A CXA signal analyzer install both additional 75 ohm RF inputand the built-in tracking generator?
No, the tracking generator is not compatible with 75 ohm input connector.

FAQ 2012-11-30

Can I use N9000A CXA signal analyzer to measure devices with 75 ohm impedance?
For N9000A-503 and N9000A-507, an additional 75 ohm RF input connector is available as Option C75. It is an N-type female connector on the instrument, with a frequency range of 1 MHz to 1.5 GHz.

FAQ 2012-11-30

前へ 1 2 3 4 5 6 7 8 9 10 ... 次へ