Sprechen Sie mit einem Experten

Technical Support

Test & Messtechnik

Find by Product Model Number: Examples: 34401A, E4440A

1-25 of 787

E5071C-TDR Method of Implementation (MOI) for High Speed Digital Applications

FAQ 2014-03-31

Are SMA connectors suitable for low PIM measurements?
Type N and DIN 7/16 are currently the most common interfaces used for low PIM applications. Both are popular for PIM measurements due to their low PIM and higher power handling. However, the SMA connector is also another option for low PIM applications. Agilent’s low PIM RF switches use SMA connectors, which can handle 120 watts of average power at 4.2 GHz for cold switching. The base material for the center connector and housing is BeCu, which is free of ferromagnetic material that ensures low PIM.

FAQ 2014-03-03

Why does my FieldFox spectrum analyzer preamplifier increase the noise floor when engaged?
The FieldFox spectrum analyzer preamplifier selection will normally reduce the displayed noise floor when activated. However, if the FieldFox RF attenuation AUTO selection is set to ON then the preamp may not reduce the noise floor.

FAQ 2014-03-03

What is the CPU / Storage / Windows OS history?
The history of CPU type/memory size, storage type/size, windows OS is listed in the table.

FAQ 2014-02-20

How can I resolve the E5061A / E5062A source output power level decrease symptom?
Execute the Source Output Power Level Correction software in correcting the source output power level of E5061A / E5062A.

FAQ 2014-02-20

Can you advise of alternatives to printing and acquiring screen images from the various Agilent Analyzers equipped with only a GP-IB interface?
There are several way to retrieve screenshots.

FAQ 2014-02-18

Noise Figure FAQ for Network Analyzers
Frequently asked questions about the PNA-X Series Source-Corrected Noise Figure Measurement (Option 029)

FAQ 2014-02-07

What is the accuracy of ENA time domain measurements?
The TDR/TDT measurement uncertainty is provided in the following table.

FAQ 2014-02-01

Where can I find manuals for discontinued and obsolete Hewlett-Packard and Agilent test equipment?
Most Agilent products have PDF manuals that can be found on product pages. Other vendors also supply old manuals.

FAQ 2013-11-22

Which currently available power meters are compatible with the 8753E network analyzer?
In order to work with the 8753E network analyzer, your power meter must emulate either the 436A, 437B, 438A E4418A or the E4419A power meter. Agilent is no longer selling those power meters. However, the E4418B (formerly named the EPM-441A) and E4...

FAQ 2013-11-17

How do I order 3.5 mm connector gauges?
Replacing Connector gauges for 85052B

FAQ 2013-10-30

What is the RF Test Blog?
RF engineers know that making good measurements is a challenge. The RF Test Blog was created as a resource for RF engineers to find ways to make better RF measurements.

FAQ 2013-10-28

On the PNA Vector Network Analyzer Family Is it possible to save a Touchstone (SnP) file with unwrapped phase?
Yes. The PNA Family of Vector Network Analyzers can save Touchstone (SnP) files with the phase information as unwrapped phase. To achieve unwrapped phase in a Touchstone file save perform the following...

FAQ 2013-07-29

My FieldFox will not boot up. Is there a way to reset it?
FAQ for FieldFox failure to boot

FAQ 2013-07-29

How do I upgrade my N9912A FieldFox RF Network Analyzer?
Find Information on Hardware Upgrades, Instrument Software, etc....

FAQ 2013-07-15

How do I upgrade my N9923A FieldFox RF Network Analyzer?
Find Information on Hardware Upgrades, Instrument Software, etc....

FAQ 2013-07-15

How can I order the upgrade kit of the 4395A
The model numbers of available upgrade kits for the 4395A options are as follows.

FAQ 2013-06-24

N6171A MATLAB Software - Agilent Compatible Instruments
N6171A MATLAB software can be purchased along with a new Agilent instrument or purchased as software to add to an existing instrument.

FAQ 2013-04-29

Replacing the 8508A vector voltmeter with the E5061B network analyzer
Measuring the phase difference of an external CW signals is a typical measurement application of the 8508A vector voltmeter.

FAQ 2013-04-25

PNA Manual, Firmware, Upgrades, and Support
PNA-L, PNA, and PNA-X Manual, firmware, software, upgrade, and support information. Also available are PNA software utilities, and calibration kit and verification kit data.

FAQ 2013-04-15

What is a Spectrum Analyzer?
"What is a spectrum analyzer?” You asked and we answered.

FAQ 2013-03-05

What is the process to capture a trace image to the floppy disk on the Agilent 8712ES/ET and 8714ES/ET Vector Network Analyzers?
The 8712ES/ET and 8714ES/ET Vector Network Analyzers support HPGL, PCX, PCL5, and GIF image saves via the floppy drive.

FAQ 2012-12-11

Are there any reference documents for TRL Calibration of network analyzers?

FAQ 2012-11-05

Is it possible to programmatically receive the displayed low/high stimulus values when using the “CALC1:MARK:BWID:DATA?” bandwidth query results?
When manually configuring the ENA network analyzer via the Marker – Marker Search – Bandwidth ON, the manual process results in low and high stimulus values as displayed on the analyzer’s front panel.

FAQ 2012-10-31

What is the difference between an "ECal Confidence Check" and a Network Analyzer "System Verification" test?
The ECal Confidence Check is a method to check the accuracy of a calibration performed with either a mechanical cal kit or an ECal module. System verification testing provides network analyzer users a method to verify that the network analyzer is ...

FAQ 2012-10-17

1 2 3 4 5 6 7 8 9 10 ... Next