전문가 상담

기술 지원

테스트 및 측정

모델번호로 검색: 예제: 34401A, E4440A

상세 분류

상세분류 제거

분야별 검색결과

제품 카테고리별

251-275 / 324

정렬방식:
VXIplug&play Driver for 33220A and 33250A
Download VXIplug&play Drivers for the 33220A and 33250A
이전 버전

드라이버 현재 버전:A.00.04 | 2003-01-01

Where can I download instrument drivers for the 33120A?
Drivers for the 33120A can be located by going to http://www.agilent.com/find/inst_drivers.

FAQ 2002-11-26

What does Error 771 on my Agilent 33120A waveform generator mean?
Error 771, "Nonvolatile cal memory checksum error" is most often due to some type of calibration error.

FAQ 2002-11-26

Where is the cfunc.h header file called for in the 33120A Users Guide example program?
Some older versions of the IB Libraries provided this header file during installation. This file was required to access commands from the IB command library.

FAQ 2002-11-26

What does the error message number displayed on the front of my 33120A waveform generator mean?
Full descriptions of error codes may be found in Chapter 5 of the 33120A User's Guide.

FAQ 2002-11-26

How do I delete a user-defined arbitrary waveform from memory?
From the remote interface, you can use the commands DATA:DELete specifiying the name of the arbitrary waveform you wish to delete.

FAQ 2002-11-26

Can I control the power-on state of the 33120A?
When power is turned off, the 33120A automatically stores its state in memory location "0".

FAQ 2002-11-26

What is the proper termination character for the 33120A?
There are two possible termination characters that can be used for the 33120A. They are:

FAQ 2002-11-26

What is the frequency accuracy of the 33120A?
The Agilent 33120A has the following specifications.

FAQ 2002-11-26

Why do I get syntax and undefined header errors when using LabView and the 33120A?
The first place to look is at the commands you are sending to the instrument from LabView.

FAQ 2002-11-26

Can I disable the output without turning the 33120A off?
The 33120A does not have a simple ON/OFF switch for the output. One possible method of producing zero output is to output 0 Volts dc.

FAQ 2002-09-12

How do I upgrade my 33120A to option 001?
The retrofit kit for Opt 001 is part number 33120-80001. This kit works for 33120A serial numbers higher than US34004077. It is field installable.

FAQ 2002-09-12

What are the mean time between failure (MTBF) and mean time to repair (MTTR) estimates for the 33120A?
Mean time between failure (MTBF) is 40,000 hours. Mean time to repair (MTTR) is 1.2 hours.

FAQ 2002-08-30

Why is the output voltage from the Agilent 33120A twice the value I set?
The Agilent 33120A has a fixed output impedance of 50 ohms on the OUTPUT terminal and the 33120A factory defaults set the display to show the output voltage when connected to a 50 Ohm load.

FAQ 2002-08-30

Is there an option for a rear-panel output on the 33120A?
No, there is not currently an option available for a rear-panel output on the 33120A.

FAQ 2002-08-30

Why do I get a syntax error (error -102) when I try to transfer a waveform from Agilent BenchLink Arb to the Agilent 33120A?
You probably need to upgrade to the latest version of Agilent BenchLink Arb (Version 1.41).

FAQ 2002-08-30

Why do I get error 580 when I power the 33120A on?
Error 580 means that your 33120A has lost the external clock.

FAQ 2002-08-30

Can I transfer waveform data from the 33120A's arbitrary waveform memory into a PC?
It is not possible to directly transfer waveform data from the 33120A to a PC. While the 33120A is capable of accepting waveform data from a PC, it is not capable of the reverse. One possible workaround involves the use of an oscilloscope.

FAQ 2002-08-30

How do I change the line voltage setting on the 33120A?
Instructions for changing the line voltage setting. 1. Remove the power cord.

FAQ 2002-08-30

How do I generate a dc voltage output from the Agilent 33120A?
The Agilent 33120A can output dc voltage in the range -5 Vdc to +5 Vdc (into a 50-ohm termination).

FAQ 2002-08-28

What is the default baud rate for the Agilent 33120A and how do I change it?
You can select one of six baud rates for RS-232 operation.

FAQ 2002-08-28

33120A: Troubleshooting the RS-232 Connection for Benchlink Arb

FAQ 2002-08-08

IntuiLink Waveform Editor, Equation / Noise Add-in
Adds additional functionality - Creates waveforms from a mathematical expression.
이전 버전

컴퓨터 소프트웨어 현재 버전:n/a | 2002-08-01

34810B/11A/12A/20B BenchLink Products: WinNT® Error

FAQ 2002-07-29

The 'Sweep Operation' in the 3324A/E1440A?

FAQ 2002-06-27

이전 ... 11 12 13 다음