Technical Support
Test & Measurement
Refine the List
remove all refinementsBy Class
By Type of Content
- Driver (23)
- Computer Software (21)
- Instrument Firmware/Software (11)
- Programming Example (132)
By Product Category
-
All Product Categories
-
Generators, Sources, Supplies
-
Function / Arbitrary Waveform Generators
- 33521A Function / Arbitrary Waveform Generator, 30 MHz [Discontinued] (7)
- 33522A Function / Arbitrary Waveform Generator, 30 MHz [Discontinued] (7)
- 33503A BenchLink Waveform Builder Pro Software (3)
- 33521U Upgrade/Retrofit Kits for the 33500A Series Options (3)
- 33250A Function / Arbitrary Waveform Generator, 80 MHz (56)
- 33220A Function / Arbitrary Waveform Generator, 20 MHz (93)
- 33210A Function / Arbitrary Waveform Generator, 10 MHz (63)
- 33502A Isolated Amplifier - 2 Channel, 50 Vpp (2)
- 81180B 4.6 GSa/s Arbitrary Waveform Generator (6)
- 81160A Pulse Function Arbitrary Noise Generator (6)
- 81150A Pulse Function Arbitrary Noise Generator (8)
- N5106A PXB Baseband Generator and Channel Emulator (2)
- N8242A Arbitrary Waveform Generator Synthetic Instrument Module, 10-Bit, 1.25 GS/s or 625 MS/s (5)
- N8241A Arbitrary Waveform Generator Synthetic Instrument Module, 15-Bit, 1.25 GS/s or 625 MS/s (6)
- U2761A USB Modular Function Generator (5)
- M9331A Arbitrary Waveform Generator, 10 bit, 1.25GS/s (2)
- M9330A Arbitrary Waveform Generator, 15 bit, 1.25GS/s (2)
- 33500B Series Waveform Generators, 20 & 30 MHz (3)
- 81199A Wideband Waveform Center (1)
- M8190A 12 GSa/s Arbitrary Waveform Generator (3)
-
Function / Arbitrary Waveform Generators
-
Generators, Sources, Supplies
151-175 of 187
|
VISA COM and IVI-COM Driver: 33250 Linear Sweep (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM: 33250A General (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM Driver: 33220 AsciiArb (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM: 33120 AM
Demonstrates how to program the instrument for AM modulation and how to store the instrument state in memory.
Programming Example 2003-03-01 |
EXE
15 KB
|
|
VISA COM and IVI-COM: 33250 AsciiArb (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM: 33120 Damped Sine (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM Driver: 33250 Simple Sine (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM Driver: 33220 Haversine
This program sets up a burst waveform with a 270 degree starting phase. By adding an offset voltage to the burst, a haversine is created. This program also shows the use of a trigger received over the GPIB interface to initiate a single trigger.
Programming Example 2003-03-01 |
EXE
15 KB
|
|
VISA COM and IVI-COM Driver: 33250 Haversine
This program sets up a burst waveform with a 270 degree starting phase. By adding an offset voltage to the burst, a haversine is created. This program also shows the use of a trigger received over the GPIB interface to initiate a single trigger.
Programming Example 2003-03-01 |
EXE
15 KB
|
|
VISA COM and IVI-COM Driver: 33220 Pulse Width (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM Driver: 33220 Pulse Waveshape (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM Driver: 33250 Square Burst
This program sets up a triggered burst that outputs three cycles of a square wave upon receipt of each trigger. It will also show how to adjust duty cycle and enable/disable the SYNC output.
Programming Example 2003-03-01 |
EXE
15 KB
|
|
SICL: *IDN? and Device Info Query on a USB Device
This program opens a communication session with a USB device, does a *IDN? query of the device and gets and displays some device information.
Programming Example 2003-03-01 |
EXE
15 KB
|
|
SICL: *IDN? and Device Info Query on a USB Device (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM: 33120 FM
Demonstrates how to program the instrument for FM modulation and demonstrates how to store and recall an instrument setup.
Programming Example 2003-03-01 |
EXE
15 KB
|
|
VISA COM and IVI-COM Driver: 33220 Haversine (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM Driver: 33220 Square Burst (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM: 33250 AsciiArb
This program uses the arbitrary waveform function to download and output a square wave pulse with a calculated rise time and fall time. The waveform consists of 4000 points downloaded to the function generator as ASCII data.
Programming Example 2003-03-01 |
EXE
15 KB
|
|
VISA COM: 33120 Apply Burst
Demonstrates the use of the Apply command and how to create a burst as an output.
Programming Example 2003-03-01 |
EXE
15 KB
|
|
VISA COM and IVI-COM Driver: 33250 AM Waveform and State Storage (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM Driver: 33250 Linear Sweep
This program sets up a linear sweep using a sinusoid waveform. It sets the start and stop frequency and sweep time.
Programming Example 2003-03-01 |
EXE
15 KB
|
|
VISA COM and IVI-COM Driver: 33250 Pulse Waveshape (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM Driver: 33220 Linear Sweep (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM: 33120 Apply Burst (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
|
VISA COM and IVI-COM Driver: 33220 Low Level SCPI Commands (Read Me)
Code sample documentation.
Programming Example 2003-03-01 |
HTML
15 KB
|
Enroll in myAgilent
Register Your Product
Why Buy Agilent