|
How do I upgrade my N9039A RF Preselector?
Find Information on Hardware Upgrades, Instrument Software, etc...
FAQ
2013-05-09
|
|
|
Signal & Spectrum Analyzer Firmware / Software Update Center
To access the most recent version of firmware or software
FAQ
2013-04-29
|
|
|
How do I remotely manage the internal alignments on my X-Series Signal Analyzer?
This example demontrates the "cal:expired?" and "cal:auto:part" commands to handle running internal alignments remotely
FAQ
2013-04-25
|
|
|
How do I upgrade my N9000A CXA Signal Analyzer?
CXA3 LAUNCH -Find Information on Hardware Options, Measurement Applications, etc....
FAQ
2013-04-22
|
|
|
How do I upgrade my N9020A MXA Signal Analyzer?
Find Information on Hardware Options, Measurement Applications, etc....
FAQ
2013-04-22
|
|
|
X-시리즈 측정 어플리케이션을 위한 무료 체험판 라이센스
30일동안 사용 가능한 X-시리즈 측정 어플리케이션을 위한 체험판 라이센스
FAQ
2013-03-28
|
|
|
How do I correctly enter and use the correction factors for a current probe such as the 11967A/B with an E7400A Series EMC
See FAQ content for information on this.
FAQ
2013-03-21
|
|
|
What is a Spectrum Analyzer?
"What is a spectrum analyzer?” You asked and we answered.
FAQ
2013-03-05
|
|
|
How often does the system user alignment for the PSA EMI Measurement Receiver need to be run?
30 days or 3° C temperature change. See contents for details...
FAQ
2012-12-11
|
|
|
Do I need to perform a periodic front panel instrument alignment on my N9039A RF Preselector?
No, but there is a system alignment that needs to be periodically run. See FAQ content for details...
FAQ
2012-12-11
|
|
|
How do I upgrade my E7400A Series EMC Analyzer?
Find Information on Hardware Upgrades, Instrument Software, etc…
FAQ
2012-08-08
|
|
|
Can I get a temporary license key for my PSA Series, ESA Series, or EMC Series Analyzer?
No. At this time, we do not have temporary licenses. License keys for these instruments are generated based on the serial number, model number, and Host ID.
FAQ
2012-05-28
|
|
|
Why do I get a Meas Uncal message when I select either the Quasi-Peak or EMI Average detector for taking a full band sweep with the MXE EMI Receiver?
Sweeptime has reached its maximum. See complete FAQ for further details...
FAQ
2012-05-10
|
|
|
How do I make the signal list compare measurements made with the detectors used to different limit lines in my MXE EMI Receiver?
Meas Setup, Detectors (Measure)...
FAQ
2012-05-10
|
|
|
How do a take a sweep with both the Quasi-Peak and EMI Average detector at the same time with an MXE EMI Receiver?
Switch to EMI Receiver mode...
FAQ
2012-05-10
|
|
|
Why do I get the "Align 20 Hz to 3.6 GHz Required" message every time I turn my MXE on?
You don't. Wait for it to warm back up...
FAQ
2012-05-09
|
|
|
How often do I need to run the RF Preselector alignments in my MXE?
Every 30 days or when the temperature changes by 3 degrees...
FAQ
2012-05-09
|
|
|
Why do I continue to get the "Align 20 Hz to 3.6 GHz Required" message even though I ran the Align Now, All routine on my MXE?
You also need to run the System, Alignments, More, RF Preselector, Align Now alignments...
FAQ
2012-05-09
|
|
|
How do I remotely control the Measure @ Marker function of the EMC Option in the N9000A, N9010A, N9020A or N9030A X-Series Signal Analyzers?
Use the remote command :CALC:MARK:FUNC:MAM? or see content of this FAQ for further details and an example VEE program...
FAQ
2012-03-16
|
|
|
How long does the system user alignment of my PSA EMI Measurement Receiver take to run?
A full system alignment takes approx. 30 minutes. See FAQ content for further details...
FAQ
2012-03-16
|
|
|
How do I erase/clear the user data in an ESA or EMC series spectrum analyzer for security reasons?
Follow this link for further information....
FAQ
2012-03-16
|
|
|
What does the system user alignment of my PSA EMI Measurement Receiver do?
See contents for details...
FAQ
2012-03-16
|
|
|
Why does my signal go off the top of the screen when I select either the Quasi-Peak or EMI Average detectors in my EMC or ESA analyzer?
Your instrument firmware may need to be updated to fix an auto ranging problem....
FAQ
2012-03-16
|
|
|
Why don't the Measure at Marker or Auto Measure peak detector values match the peak trace marker values on my EMC analyzer?
Your instrument firmware may need to be updated....
FAQ
2012-03-16
|
|
|
Why does my PSA EMI Measurement Receiver tell me that I need to run the user alignment everyday?
There are a couple of reason why this could be hapening. See FAQ contents for details...
FAQ
2012-03-16
|
|
상세분류 제거
myAgilent에 등록
제품 등록
왜 애질런트 일까요?