|
Instead of using the LAN port can't I communicate with my N9039A RF Preselector using the GPIB or USB port?
Yes, but not when being controlled by a PSA in EMC Analyzer mode...
FAQ
2008-07-01
|
|
|
What are the default logins and passwords for the N9039A RF Preselector?
User name = instrument, Password = measure4u. See FAQ content for more details...
FAQ
2008-07-01
|
|
|
Why is the sweeptime so long on my EMC analyzer when I select the Quasi-Peak Detector?
Because of the CISPR 16-1 specified time constants for one.......
FAQ
2008-06-27
|
|
|
The E7415A EMI Measurement Software is giving me an error stating "Local(HPIB) failed", how do I fix this?
Set your GPIB interface SICL name to hpib7 in the Agilent IO Config.
FAQ
2008-03-10
|
|
|
Is the 82357A USB/GPIB Interface supported with the E7415A EMI Measurement Software?
Yes, with certain qualifications.....
FAQ
2008-03-10
|
|
|
Are additional details available pertaining to the Agilent N4421AK20 or Agilent N4421A-B20 cables?
FAQ
2008-01-29
|
|
|
How often should we perform the verification procedure described in the Performance Tests section of the manual?
Every 12 months.
FAQ
2008-01-11
|
|
|
Why the I/O library cannot read data from the instrument?
A suggested procedure for the IO Libraries Error Message.
FAQ
2008-01-08
|
|
|
Is it possible to save a full-sized screen capture, without the softkeys?
Yes... See content for details...
FAQ
2007-12-20
|
|
|
How can I use the Rear Panel DC Input Connector on my ESA/EMC Series Spectrum Analyzer?
The ESA/EMC will run on DC power via the Option A5D DC Input cables or the E1779A Battery pack.
FAQ
2007-12-20
|
|
|
Is the VGA output of the ESA and EMC Series Analyzer monochrome or color?
On both product families, the output is color.
FAQ
2007-12-20
|
|
|
Is a screen capture software package available for the ESA Series spectrum analyzer?
The E4444A BenchLink Spectrum Analyzer software is a screen capture program that easily transfers measurement results from your ESA Series portable spectrum analyzer to a Windows-based PC.
FAQ
2007-12-20
|
|
|
What do "R", "L", "T", and "S" refer to in the upper-righthand portion of the analyzer's display?
See content for details...
FAQ
2007-12-20
|
|
|
What is the difference between video and power averaging types on the ESA Series Spectrum Analyzers?
Video should be used when in a LINEAR scale, Power should be used when in a LOG scale.
FAQ
2007-12-20
|
|
|
How do I troubleshoot E5500 GPIB connectivity?
Here is the procedure to follow if there is a problem with instrument connections via GPIB with the E5500 software.
FAQ
2007-10-18
|
|
|
Is there a master listing of compatible printers for various network analyzers and impedance analyzers?
FAQ
2007-07-10
|
|
|
How long will the 8546A/2E instruments be supported?
Support life will end in March 2006
FAQ
2007-06-29
|
|
|
How do I change the signal path settings from the front panel on my N9039A RF Preselector?
From the PSA controlling it.
FAQ
2007-05-31
|
|
|
Do I need to use the side support brackets that came with my N9039A RF Preselector?
Yes. See FAQ content for details...
FAQ
2007-05-31
|
|
|
When do I need to use a LAN/GPIB Gateway (Option 011) with my EMI Measurement System?
When using an 8648B as the alignment source...
FAQ
2007-05-31
|
|
|
How do I tune the frequency of my N9039A RF Preselector?
From the PSA controlling it...
FAQ
2007-05-31
|
|
|
How can I store the measurement data in the storage device (i.e. built-in HDD) via SCPI command?
You can use :MMEMory command to store the trace or memory data of the display.
FAQ
2007-04-22
|
|
|
What is the ETS part number for the 11966A?
ETS # 6502
FAQ
2007-01-22
|
|
|
What is the ETS part number for the 11966I?
ETS # 3106
FAQ
2007-01-22
|
|
|
Is the Agilent 85070E Material Measurement software compatible with legacy Agilent 85070A/B/C/D High Temperature Dielectric Probes?
Yes, the Agilent 85070E software is backwards compatible with all the legacy high temperature probes Agilent has sold.
FAQ
2006-12-19
|
|
remove all refinements
Enroll in myAgilent
Register Your Product
Why Buy Agilent