Contact an Expert

Technical Support

Electronic Measurement

Find by Product Model Number: Examples: 34401A, E4440A

26-42 of 42

Sort:
Testing and Troubleshooting Digital RF Communications Transmitter Designs (AN 1313)
This Application Note covers the following 3 topics: 1) How digital communications transmitters work, 2) Essential transmitter tests and important test equipment characteristics, and 3) Troubleshooting techniques for common impairments.

Application Note 2002-01-08

Investigating Bluetooth Modules: The First Step in Enabling Your Device with a Wireless Link
This Application Note is designed for vendors or manufacturers who plan to add a wireless link to their products by installing commercially-available, pre-built Bluetooth® modules into them.

Application Note 2001-09-30

ESG (Revisions B.03.72, B.03.75 and B.03.80) Option 200 Compliance with 3GPP W-CDMA
The ESG signal sources can be used to generate the signals to perform many of the receiver characteristics and performance requirements measurements for user equipment and base stations as defined by the 3GPP standard.

Application Note 2001-03-01

PDF PDF 34 KB
Multi-Coded Waveform Quality and Code Domain Measurements for cdma2000
Waveform quality is the basic measure of the performance of a CDMA system transmitter. The success of a CDMA system lies in its efficient use of power, and the waveform quality measurement gives the percent of power that correlates to the ideal code.

Application Note 2001-02-14

89410A and 89440A Vector Signal Analyzer Characterization of Digital Communications Channels
Accurate measurements of channel imperfections are important to the designers and operators of digital communication systems.

Application Note 2000-11-01

HPSK Spreading for 3G (AN 1335)
The objective of this Application Note is to provide an overview of Hybrid Phase Shift Keying (HPSK) and explain how to start making modulation quality measurements on the reverse link (uplink) of 3G spread-spectrum systems.

Application Note 2000-11-01

Using EVM Measurements to Analyze and Troubleshoot Vector-Modulated Signals (PN 89400-14)
This Product Note reviews the basics of EVM measurements on the 89400 vector signal analyzers, and outlines a general procedure that may be used to methodically track down even the most obscure signal problems. Understanding Error Vector Magnitude EVM Defined Making EVM...

Application Note 2000-10-01

10 Steps to a Perfect Digital Demodulation Measurement (PN 89400-14A)
This Product Note provides a recommended procedure for configuring the Agilent 89400 Series Vector Signal Analyzers to demodulate and characterize a wide variety of digitally-modulated signals. Follow it step-by-step to insure that no important setup parameters are missed or incorrectly...

Application Note 2000-10-01

Comparing Power Measurements on Digitally Modulated Signals
Measuring the power of digital CDMA signals is not as straightforward as the procedure employed when measuring their analog counterparts. While there are several ways to perform these in-channel and out-of-channel measurements, a spectrum analyzer and software-implemented power detection makes...

Application Note 2000-09-01

PDF PDF 81 KB
Using Vector Modulation Analysis in Digital RF Communications Systems (PN 89400-8)
Agilent 89400 Series Vector Signal Analyzers with vector modulation analysis (option AYA) provide the numerical and visual tools to help quickly identify and quantify impairments to digitally modulated signals, whether using standard or several non-standard modulation formats. This Product...

Application Note 2000-09-01

Measuring Complex Burst Signals with Time-Gated Spectrum Analysis (PN 8590-9)
This Product Note describes how 8590 C/E-series Spectrum Analyzers with Option 105, Time-Gated Spectrum Analysis, can help make measurements of pulsed signals such as Time-Division Multiple-Access (TDMA) easy.

Application Note 2000-07-01

PDF PDF 122 KB
Understanding CDMA Measurements for Base Stations and Their Components (AN 1311)
This Application Note presents the fundamental measurement principles for the RF parametric tests performed on Code Division Multiple Access (CDMA) base stations and their components.

Application Note 2000-06-01

Performing cdma2000 Measurements Today (AN 1325)
cdma2000 is the 3GPP2 standard for 3G technology derived from cdmaOne. Although the standard has not yet been defined, R&D component and system engineers need to test their cdma 2000 designs today. This Application Note is a guide to cdma2000 testing based on established cdmaOne measurements...

Application Note 2000-05-22

Testing CDMA Base Station Amplifiers (AN 1307)
The objective of this Application Note is to cover the basic measurement fundamentals of characterizing the linear and non-linear behavior of CDMA power amplifiers.

Application Note 2000-05-01

ESG Option 201 Real-time IS-2000 Measurements
This Product Note discusses features, setup, and applications for the Agilent ESG Option 201 Real-time cdma2000 personality. It is intended to provide R&D designers working on DSPs, ASICs, and other firmware components of IS-95 and IS-2000 mobile phones with techniques for testing and...

Application Note 2000-04-03

PDC and NADC Transmitter Measurement for Base Transceiver Stations and Mobile Stations (AN 1324)
This Application Note describes the key RF parametric measurements necessary to characterize Personal Digital Cellular (PDC) and North American Digital Cellular (NAD) transmitters in both Base Transceiver Stations (BTS) and Mobile Stations (MS).

Application Note 2000-02-01

PDF PDF 743 KB
Characterizing Digitally Modulated Signals with CCDF Curves
This Application Note examines the main factors that affect power CCDF curves, and describes how CCDF curves are used to help design systems and components. The Agilent E4406A VSA Series Transmitter Tester is utilized in the Note.

Application Note 2000-01-01

Previous 1 2