Hable con un experto

Technical Support

Test y Medida

Find by Product Model Number: Examples: 34401A, E4440A

Refine the List

remove all refinements

By Topic

By Application

By Type of Content

By Product Category

76-100 of 157

Sort:
Why doesn't Windows® detect new hardware when I plug the E5813A USB Hub into the computer?
The new hardware is not detected when you plug the E5813A USB Hub into the computer because the PC driver may not be installed properly....

FAQ 2009-01-12

IVI Instrument Drivers Overview
Learn more about IVI-COM and IVI-C instrument drviers.

FAQ 2008-10-01

What will happen to the E5810A LAN/GPIB Gateway (with firmware revision A.01.05) when it is powered ON for 5 minutes without a LAN connection?
When the E5810A (with firmware revision A.01.05) is powered ON for 5 minutes without a LAN connection, a static IP will be assigned….

FAQ 2008-09-25

How do I configure the E5810A LAN/GPIB Gateway web access when updating firmware from the local FTP server?
When updating firmware from the local FTP server, follow the steps below to configure the E5810A LAN/GPIB Gateway web access:….

FAQ 2008-09-25

What is the maximum torque force allowable on the 82350B GPIB card connector?
The maximum torque force allowable when attaching a GPIB cable to the 82350B GPIB card connector is 8 in. lbs.

FAQ 2008-09-24

How do I connect the 33210A or 33220A to a PC via the USB port?
Install IO Libraries. Connect instrument. When prompted select “display a list of known drivers…”

FAQ 2008-09-01

Can I close all of the channels in the reed cards (ie. 34923A, 34924A, and 34933A) at the same time when working in switch mode?
No. Due to power dissipation, you cannot close all of the channels in the reed cards simultaneously when working in switch mode.

FAQ 2008-08-15

What is the meaning of P1dB and Psat as stated in amplifier specifications?

FAQ 2008-07-15

Can I Perform Open/Short Test Using 34980A?
Yes. There are two ways you can setup using the 34980A to perform this test.

FAQ 2008-06-25

Does the L449XA have universal AC power input?
Yes, 100 Vac to 240 Vac +/- 10%, 50-60Hz.

FAQ 2008-04-07

Can the L4490A/L4491A mainframe be password protected when using LAN?
Yes, instructions for using password protection can be found in the web interface.

FAQ 2008-04-07

Can I record the L4490A/L4491A I/O traffic?
Yes, select the "System Overview" button in the web browser to "Generate Report".

FAQ 2008-04-07

Can I assign names to switches when using the L4490A/L4491A?
Yes. At the web interface, right click on the switch to assign a name.

FAQ 2008-04-07

Do the L449XA switch mounting kits come with screws?
Yes, they come with screws to mount bracket to switch tray, Torx T20 (M4).

FAQ 2008-04-07

Can Agilent build my custom L4490A/L4491A solution?
Please visit "www.agilent.com/find/AD-systems" or see Agilent’s Channel Partners and Solution Providers at "www.agilent.com/find/channelpartner"

FAQ 2008-04-07

Can I mount a fan in the L449XA mainframe for cooling?
Yes, there is a fan mounting location on the rear panel for a 60mm (50mm mounting hole-to-hole spacing).

FAQ 2008-04-04

Does the L449XA switch tray support Agilent RF switches?
Yes, see data sheet.

FAQ 2008-04-04

Does the L449XA have USB? What interfaces are built in?
LAN and GPIB are included. The 82357B USB/GPIB converter is available if you require USB.

FAQ 2008-04-04

Do I have to buy distribution boards for the L4490A/L4491A?
Yes, the distribution boards are required to route the control signals to the switches and attenuators.

FAQ 2008-04-04

Can I add another 34945EXT to the L449XA?
The L4491A option 002 is recommended if an additional 34945EXT is required.

FAQ 2008-04-04

How does the L449XA switch closure counter work?
It counts each operation of the switch (open + close) and is stored in non-volatile memory of the instrument.

FAQ 2008-04-04

Does Agilent offer L449XA mounting brackets for Agilent switches?
Yes, see data sheet.

FAQ 2008-04-04

How do I use the L449XA web browser?
Connect the L4490A directly to your computer or the network using the LAN interface. See complete answer for details.

FAQ 2008-04-04

Does the L449XA mainframe have an RF shielding specification?
There is no spec for RF shielding.

FAQ 2008-04-04

How many instrument states can I save in the L449XA?
Five instrument states, but you have the ability to save up to 500 switch sequences.

FAQ 2008-04-04

Previous 1 2 3 4 5 6 7 Next