Contact an Expert

Technical Support

Spectrum Analyzers (Signal Analyzers)

Find by Product Model Number: Examples: 34401A, E4440A

26-50 of 70

Sort:
What is preventing the 89600 VSA software, running on a PC, from connecting to an X-Series signal analyzer?
Procedure for connecting from 89600 VSA software to an X-Series signal analyzer.

FAQ 2012-03-16

Can the N9342C PC software work with the N9340B?
No, the N9342C PC software can’t work with the N9340B.

FAQ 2012-03-02

Why does the N5530S Measuring Receiver require Option 123 (Preselector Bypass) above 3 GHz?
Preselector drift introduces errors to the amplitude measurements.

FAQ 2012-02-27

What is the frequency range of the N5532A Sensor Module?
100 kHz to 4.2 GHz, 10 MHz to 18 GHz, 30 MHz to 26.5 GHz, and 30 MHz to 50 GHz.

FAQ 2012-02-26

How do I recover my VSA 89600S license after a hard drive crash?
When a site key is entered into the 89601A software, license files are generated that reside on the PC hard drive. If the hard drive is replaced or re-imaged, a new site key must be requested as if for the first time.

FAQ 2012-02-25

When does the BER test apply in the N9081A Bluetooth® measurement application?
The BER test only applies for EDR with a PRBS9 signal pattern.

FAQ 2011-11-12

Is there PC software available for my handheld spectrum analyzer?
Yes, all HSA models have free, downloadable PC software.

FAQ 2011-11-11

Are the handheld spectrum analyzers supported by 89600 VSA software?
No, the 89600 VSA software does not work with the HSA.

FAQ 2011-11-04

What is the operating system used by the handheld spectrum analyzers?
The HSAs use the VxWorks operating system.

FAQ 2011-11-03

Does the handheld spectrum analyzer PC software support a Windows® 7 system?
Yes

FAQ 2011-10-28

How do I update my X-Series Signal Analyzer Software
Software updates for the X-Series Signal Analyzers (PXA/MXA/EXA/CXA/MXE)

FAQ 2011-09-02

Is There a GPS Receiver for FieldFox?
GPS capability has been added to FieldFox starting from firmware revision A.05.33.

FAQ 2011-08-17

What are the connectivity ports on the Agilent X-Series (PXA/MXA/EXA/CXA) Signal Analyzer?
Information found here...

FAQ 2011-03-24

What AntiVirus software does Agilent recommend for the Agilent X-Series (PXA/MXA/EXA/CXA) Signal Analyzers?
Click here for information...

FAQ 2011-03-24

How do I control instruments such as 82357A, E5810A, and 82350B using the GPIB interface?
There are several approaches to control instruments via the GPIB interface...

FAQ 2010-09-14

What versions of 89600 software are supported?
Supported versions of 89601, 89604, and 89607 are listed here.

FAQ 2010-09-08

In the ESA Series, how can I save the results of a Channel Power, ACP, OBW, Emission Bandwidth, or Harmonic Distortion measurement?
Save a screen image to the floppy disk drive.

FAQ 2010-06-14

What operating systems are supported for use with the 89601A/AN Series software?
Windows NT4 (SP6 or greater), Windows 2000, Windows XP Professional, Windows Vista, Windows 7

FAQ 2010-04-27

Can we control N9320B with N9320A PC software?
No, N9320A PC software cannot be used to control N9320B spectrum analyzer. Free N9320B PC software is available for download.

FAQ 2009-12-16

Does U8903A unit contain a hard disk?
No. The U8903A is using flash memory as storage.

FAQ 2009-07-16

Does N9320B support Intuilink?
No, N9320B doesn’t support Intuilink. Free N9320B PC software will be available for downloaded from Agilent website in late 2009.

FAQ 2009-07-13

ESA-L1500A: Spectrum Analyzer Firmware Upgrade and Service Connector
An Agilent Service Center may be able to provide this service...

FAQ 2009-04-14

Is it possible to get an error log of incorrectly sent remote commands to my PSA, E4406A, EMC, or ESA Series Spectrum Analyzer?
Yes. PSA, E4406A and the ESA Series (with firmware A.08.00 and later) support this. You may turn Verbose error logging on through the front panel or remotely, SYST:ERR:VERBOSE ON

FAQ 2008-11-21

Can I write my own measurement personalities or downloadable programs (DLPs) for the E4406A, PSA Series, or ESA Series Analyzers?
No. We do, however, offer many tools to facilitate remotely interfacing of our instruments to a PC to write custom applications. We do also offer flexible digital demod through the 89601A software, and this software does have custom macro capabi...

FAQ 2008-11-21

Does the E4406A or PSA Series support an external keyboard or mouse?
The external keyboard port is only used to control the instrument during firmware upgrades. The user interface for the E4406A or PSA allows you to completely control the instrument via the front panel keys.

FAQ 2008-11-20

Previous 1 2 3 Next