|
What is the measurement uncertainty for the 8902A Option 50?
The only uncertainty in the 8902A Option 050 test system should be the accuracy of the attenuation source.
FAQ
2012-05-30
|
|
|
What is the frequency range of the N5532A Sensor Module?
100 kHz to 4.2 GHz, 10 MHz to 18 GHz, 30 MHz to 26.5 GHz, and 30 MHz to 50 GHz.
FAQ
2012-02-26
|
|
|
Why do spurious signals appear in my spectrum analyzer span when I apply a clean signal to the RF input?
Overdriving the input mixer of the analyzer may cause the spurs.
FAQ
2012-02-26
|
|
|
How does the 89400 series vector signal analyzer (VSA) lock to the symbols when it demodulates a vector-modulated signal?
There is no coherent carrier or symbol clock timing signal required for demodulation. The actual demodulation algorithm is proprietary, but...
FAQ
2012-02-25
|
|
|
How can I transfer trace data from the 89400 VSA to my PC?
The VSA always saves data in standard data format; the utility is run from the DOS prompt.
FAQ
2012-02-25
|
|
|
Why is the marker Count Accuracy on the on the ESA Series Spectrum Analyzer only specified when using resolution bandwidths >1KHz?
If more that one signal is present in the 1kHz span, the marker count will be incorrect.
FAQ
2010-09-08
|
|
|
Why does the built-in speaker of my E7400A EMC and ESA Analyzer appear to cut out while demodulating signals?
This is due to the internal auto alignment routine...
FAQ
2008-10-09
|
|
|
Why does a "chirping" sound eminate from my E7400A EMC and ESA Analyzer?
This is due to the internal alignment routine...
FAQ
2008-10-09
|
|
|
In the ESA-E Series, is the High Stability Frequency Reference (Option 1D5) powered while it is in Standby?
No... See content for details...
FAQ
2008-10-09
|
|
|
Why is the sweeptime so long on my EMC analyzer when I select the Quasi-Peak Detector?
Because of the CISPR 16-1 specified time constants for one.......
FAQ
2008-06-27
|
|
|
What is the difference between video and power averaging types on the ESA Series Spectrum Analyzers?
Video should be used when in a LINEAR scale, Power should be used when in a LOG scale.
FAQ
2007-12-20
|
|
|
What Is Quasi-peak Detection?
An annoyance meter....
FAQ
2004-06-22
|
|
|
How many correction points can be entered into an 8590EM Series EMC Analyzer?
80 discrete points....
FAQ
2004-06-22
|
|
|
Are transducer factors in an 8590EM Series subtracted when entered as positive values?
Yes....
FAQ
2004-06-22
|
|
|
Why is there a notch in the noise floor of the 8593EM & 8596EM at 6.5 GHz?
See context for details....
FAQ
2004-06-22
|
|
|
What are the advantages of using the 8590EM Series Vs 8590E Series with the 85712D DLP?
See context for details....
FAQ
2004-06-22
|
|
|
How does the 8590EM Series avoid image responses?
See context for detailed information....
FAQ
2004-06-22
|
|
|
Can I use a LISN with a GFCI or ELCB Protected Outlet?
No.
FAQ
2004-06-21
|
|
|
89400 -- Controlling the Sampling Frequency
FAQ
2002-06-27
|
|
|
8901A, 8901B Power Meter and AM, FM Calibrators
FAQ
2002-06-27
|
|
|
8901B LO Feedthrough out the RF Input Port
FAQ
2002-06-27
|
|
|
8903B, Frequency and Amplitude Specifications
FAQ
2002-06-27
|
|
|
89400: 12Vdc Inverter Manufacturer
FAQ
2002-06-27
|
|
|
8903, Quasi-Peak Detection, Signal-to-Noise Measurements
FAQ
2002-06-27
|
|
|
89400: Display Resolution
FAQ
2002-06-27
|
|
retirer tout le raffinement
Enroll in myAgilent
Register Your Product
Why Buy Agilent