Agilent E1366A Product Photograph

E1366A Dual 1 x 4, 50 Ohm; RF Multiplexer

產品狀態: 現已上市 | 目前可支援

按一下可折疊本面板功能主要技術規格

  • 1-Slot, B-size, register based
  • Two 1 x 4 multiplexers
  • Up to 1.3 GHz signals switched
  • BNC connectors
  • Off-channels terminated
  • Low insertion loss

按一下可折疊本面板功能敘述

The Agilent E1366A 50 Ohm RF Multiplexer is a B-size, 1-slot, register- based VXI module. It is the ideal choice to switch test signals to your oscilloscope and spectrum, network, distortion analyzers, or other RF equipment. The E1366A is identical to the E1367A, except that the E1367A has a 75 Ohm characteristic impedance.

Switching consists of connecting a channel to its common terminal. The E1366A can easily be used with SCPI commands to scan multiple channels, where each channel is switched to its common, one at a time. When open (disconnected from common), each channel is connected to a 50 Ohm temination.

This multiplexer module is arranged as two independent banks of channels (Bank 0 and Bank 1), each acting as a 1 x 4 one-wire multiplexer. Only one channel in each bank can be connected to its common at any time. Each channel consists of a non-latching armature relay. At power-on or reset, all channels are open and connected to their termination resistors. The termination resistor can be removed if desired. The multiplexer relays are arranged in a tree-switched configuration, providing high isolation and low VSWR.

按一下可折疊本面板功能價格及供應

供應 電洽

價格: 台灣 | 選擇國家或地區

價格如有變動，恕不另行通知。

按一下可折疊本面板功能最新消息 詳細資訊

  • Switching Tips for DAQ and Functional Test CD Order Form Switching Tips CD - Contains videos, application notes and seminars on how to be more productive with your switch/measure unit.

1 / 2 | 更多重點...

按一下可折疊本面板功能教育訓練 & 活動

沒有相關資料

按一下可折疊本面板功能相關聯結