Lightwave and Photonic Measurement Products

Note applicative

Lingua:Italiano | English | Entrambi

Ottimizza per:

Note applicative

1-25 di 101

Ordina:

Risultati

Ruolo/descrizione Date Tipo
PDF PDF 1.93 MB 101 of high speed optical component characterization
The application note gives you deep insight into the basics of electro-optical S-parameter test with the Lightwave Component Analyzer (LCA).
2008-01-18 Application Note
PDF PDF 1.61 MB 40 Gb/s and Return-to-Zero Measurements Using the 86100A Infiniium DCA (PN 86100-3)
This note describes the evolution of the Agilent 86100A Infiniium DCA for 40 Gb/s test and how measurement requirements have been implemented in the instrument through improved hardware and firmware.
2001-11-15 Application Note
PDF PDF 502 KB 71400 Lightwave Signal Analyzer (AN 371)
This application note explains how the Agilent 71400C lightwave signal analyzer is used to perform measurements related to modulated light.
2000-07-01 Application Note
PDF PDF 731 KB 81910A Photonic All-parameter Analyzer Product Note
This product note is intended to introduce the Agilent 81910A basic concepts and features.
2002-06-10 Application Note
PDF PDF 198 KB A Random PMD Emulator Based on the Agilent 11896A
This product note describes the random emulation of first- and second-order polarizatin-mode dispersion (PMD) using a setup coonsisting of multiple polarization maintaining (PM) fibers and Agilent 11896A polarization controllers.
2002-05-01 Application Note
PDF PDF 162 KB Accurate Characterization of Source Spectra Using an Optical Spectrum Analyzer, AN1550-5
This application note gives a descriptive overview of how light sources emit light and how the important parameters can be measured using an Optical Spectrum Analyzer.
2001-02-01 Application Note
PDF PDF 1.54 MB Agilent Makes Light Work in the OTN
This wall-chart graphically interprets the network node interface of the OTN as defined in ITU-T G.709 recommedations.
2002-08-01 Application Note
PDF PDF 543 KB Agilent Points the Way to SDH
Downloadable wall-chart in PDF form describing Agilent's implementation of SDH.
2002-08-05 Application Note
PDF PDF 818 KB Agilent Points the Way to SONET
Downloadable wall-chart describing Agilent's implementation of SONET.
2002-08-05 Application Note
PDF PDF 422 KB Agilent Technologies Gigabit Ethernet Fiber Certification
This note is designed as a practical guide to test the fiber links associates with the Gigabit Ethernet standard.
2002-04-30 Application Note
PDF PDF 1.17 MB Alarm Stress Testing Application Note
This product note will show how the OmniBER OTNs powerful and flexible test capability can be used to ensure design compliance to the latest standards.
2002-09-20 Application Note
PDF PDF 955 KB All channel testing OmniBER OTN 10 Gb/s communications performance analyzer
This product note examines how stimultaneous monitoring technology can be applied to reduce design and manufacturing test time, and increase the depth of testing from Agilents new OmniBER OTN.
2001-09-07 Application Note
PDF PDF 816 KB ATM Error Performance Testing: OmniBER Communications Performance Analyzer Product Note
This product note discusses possible ATM errors and describes a unqiue technique for providing simultaneous measurement of these errors.
2000-03-01 Application Note
PDF PDF 2.01 MB Characterizing High-Speed Optical Transmitters Compliance Testing with the Agilent 86100A AN: 1340-1
This application note will focus on the testing of opticaltransmitters used by three communications technologies:SONET/SHD, Gigabit Ethernet, and Fibre Channel.
2000-08-01 Application Note
PDF PDF 136 KB Communications Services Solutions
Unlocking Business Opportunities in the Metro Market
2002-10-23 Application Note
PDF PDF 164 KB Comparison of Different Jitter Analysis Techniques With a Precision Transmitter
This white paper describes how various jitter analysis techniques give dissimilar results. Which is right? We built a precision jitter transmitter to compare results of different techniques where test sets were exposed to known levels of jitter.
2006-04-06 Application Note
PDF PDF 142 KB Complete Analysis of Erbium-Doped Fiber Amplifiers
This Technical Paper discusses methods and instruments for measuring EDFAs with respect to gain and noise figure, both in static and dynamic form, polarization dependence, polarization mode dispersion, WDM characteristics and more. The influence of the spectral width of the laser source on the...
1996-03-01 Application Note
PDF PDF 478 KB Converting ATE Control from Agilent 83480A to 86100A (PN 86100-1)
This application note gives you information about the 86100A syntax changes and new or enhanced commands. It also tells you the 83480A commands which are not supported by the 86100A.
2000-02-01 Application Note
PDF PDF 563 KB Converting Code from the Agilent 71603B to the Agilent 86130A BitAlyzer Error Performance Analyzer
This product note tells you the differences in remote programming commands used in the 71603B and the 86130A. It gives a list of all 71603B commands and changes that need to be made for the 86130A.
2001-01-23 Application Note
PDF PDF 270 KB Data Logging Using Remote Programming (AN 1370-1)
One of the most useful applications of remote programming of test instruments is to run the same test periodically and simultaneously.
2000-12-15 Application Note
PDF PDF 3.16 MB Defining Sensitivity of the Agilent 86100A Digital Communications Analyzer (PN 86100-5)
This product note describe the main specification that determines the sensitivity of the Agilent 86100A Infiniium DCA (digital communications analyzer) being the inherent noise level of the specific 86100 plug-in module.
2001-08-01 Application Note
PDF PDF 1.21 MB Digital Communication Analyzer (DCA), Measure Relative Intensity Noise (RIN) (PN 86100-7) 2008-05-08 Application Note
PDF PDF 1.07 MB Distortion and Intermodulation (AN 15)
This Application Note is for information only. Agilent no longer sells or supports these products.
1964-01-01 Application Note
PDF PDF 226 KB Does your TLS have specifications pertinent to swept measurements?
This technical note describes the parameters given in the specifications of the TLS that are pertinent to dynamic conditions (that is, swept measurements).
2002-07-10 Application Note
PDF PDF 356 KB EDFA Testing with the Interpolation Technique
This product note describes the measurement of erbium-dopedfiber amplifiers (EDFA's) with an optical spectrum analyzer(OSA) using the interpolation measurement technique.
2000-09-01 Application Note

1-25 di 101

1 2 3 4 5 Successivo