|
|
PDF
1.91 MB
|
10GbE Technology and Device Characterization with the 81250 ParBERT
A wide range of measurements are described in the 802.3ae Standard, including optical transmitter and receiver testing, electrical XAUI test are essentially eye mask measurements.
|
2003-04-22
|
Application Note
|
|
|
|
PDF
3.68 MB
|
3GPP Long Term Evolution: System Overview, Product Development and Test Challenges
This application note focuses on LTE and includes content on system overview, product development and test challenges of this new wireless communications technology.
|
2009-09-08
|
Application Note
|
|
|
|
PDF
1.61 MB
|
40 Gb/s and Return-to-Zero Measurements Using the 86100A Infiniium DCA (PN 86100-3)
This note describes the evolution of the Agilent 86100A Infiniium DCA for 40 Gb/s test and how measurement requirements have been implemented in the instrument through improved hardware and firmware.
|
2001-11-15
|
Application Note
|
|
|
|
PDF
736 KB
|
8 Hints for Debugging Siemens MCU-based Designs
A new type of instrument, the mixed signal oscilloscope (MSO), closes the gap in MCU debugging tools. The Agilent 54645D from
Hewlett-Packard combines two analog scope channels with 16 digital logic channels, so you can monitor analog and digital lines at the
same time. This MSO offers more...
|
1998-11-01
|
Application Note
|
|
|
|
PDF
739 KB
|
8 Hints for Making Better Spectrum Analyzer Measurements (pdf format) (AN 1286-1)
This application note provides eight pertinent hints for making better spectrum analyzer measurements such as measuring low level signals and indentifying internal distortion products.
|
2009-09-07
|
Application Note
|
|
|
|
PDF
840 KB
|
8 More Hints for Making Better Scopes Measurements
This Application Note contains a variety of hints to help you understand and improve your use of oscilloscopes. It includes the following 8 hints: 1. Don't forget to check that probe 2. A quick, easy way to troubleshoot mixed hardware/software prototypes 3. Using scopes to measure noisy signals 4...
|
1999-12-01
|
Application Note
|
|
|
|
PDF
792 KB
|
A Time-Saving Method for Analyzing Signal Integrity in DDR Memory Buses
This application note covers new tools and measurement techniques for characterizing and validating signal integrity of DDR (double data rate
synchronous dynamic random access memory) signals.
|
2008-09-10
|
Application Note
|
|
|
|
PDF
818 KB
|
Acqiris Broadband High-Speed Digitizers using 89600 VSA Software Application Note
This application note describes the characteristics, setup, and operation of a broadband vector signal analyzer comprised of an Agilent Acqiris U1066A (DC440, DC438) or U1065A (DC282, DC252, DC222) high-speed digitizer and the 89600 VSA software.
|
2008-09-10
|
Application Note
|
|
|
|
PDF
549 KB
|
Advanced Jitter Generation and Analysis Product Note
This product note shows how the Agilent pulse generators can be used with the DCA-J Oscilloscope.
|
2004-10-04
|
Application Note
|
|
|
|
PDF
976 KB
|
Advantages and Disadvantages of Using DSP Filtering on Oscilloscope Waveforms
As long as you are aware of the tradeoffs inherent in some filtering types, it makes sense to use DSP filtering to improve the accuracy and resolution of today’s real-time oscilloscopes.
|
2004-05-24
|
Application Note
|
|
|
|
PDF
|
Agilent 81100 Family of Pulse Pattern/Generators Radar Distance Test to Airborne Planes (PN 1)
This Product Note describes how a trigger pulse train of double pulses is sent from the control tower's radar system to an airplane.
|
2004-10-12
|
Application Note
|
|
|
|
PDF
220 KB
|
Agilent 81100 Family of Pulse/Pattern Generators the Dual Clock Gbit Chip Test (PN 2)
In this Product Note the principle is to deliver a variable clock to feed either your device(s), board(s) or instrument(s). Due to the two channel capability it is also possible to generate clocks which ...
|
2004-10-18
|
Application Note
|
|
|
|
PDF
370 KB
|
Agilent Analysis Probes/Adapters for Intel Celeron™, Pentium® II/III and Xeon Processors
This document is a Product Overview for the E2487C analysis probe and E2492B/C/E probe adapters for use with Intel Celeron™, Pentium® II/III and Pentium® II/III Xeon processors.
|
1999-11-01
|
Application Note
|
|
|
|
PDF
351 KB
|
Agilent E2492S Analysis Probe for the Intel Pentium® II Processor with MMX™ at 333 MHz
This Product Overview covers logic analysis support for the Intel Pentium® II processor with MMX™ technology at 333 MHz.
|
1998-02-01
|
Application Note
|
|
|
|
PDF
96 KB
|
Agilent InfiniiMax Probes Impact on Lead-Free (ROHS) Compliance
Some Agilent InfiniiMax oscilloscope probe heads are intended for soldering to the device under test.
|
2006-05-24
|
Application Note
|
|
|
|
PDF
3.61 MB
|
Agilent Radar Measurements
This application note focuses on the fundamentals of measuring basic pulsed radars and measurements for more complex or modulated pulsed radar systems.
|
2009-06-22
|
Application Note
|
|
|
|
PDF
717 KB
|
Agilent Technologies Oscilloscope Fundamentals
We will discuss oscilloscope applications and give you an overview of basic measurements and performance characteristics.
|
2008-04-25
|
Application Note
|
|
|
|
PDF
817 KB
|
An Overview of the Electrical Validation of 10BASE-T, 100BASE-TX, and 1000BASE-T
The technology used in these ports, commonly known as “LAN” or “NIC” ports, is usually one of the 10BASE-T, 100BASE-TX, and 1000BASE-T standards or a combination of them.
|
2008-08-29
|
Application Note
|
|
|
|
PDF
1.36 MB
|
Analyzing Jitter Using Agilent EZJIT Plus Software
EZJIT Plus is an optional jitter analysis software package that supports Infiniium DSO80000 real-time oscilloscopes from Agilent Technologies, Inc., and it performs RJ/DJ analysis. EZJIT
|
2005-09-15
|
Application Note
|
|
|
|
PDF
320 KB
|
Best of 8 Hints for Making Better Oscilloscopes Measurements
Agilent engineers sharing ideas of how to use the equipment they design
|
2008-03-17
|
Application Note
|
|
|
|
PDF
437 KB
|
Capturing the Fifth Harmonic: Tradeoffs Between Sampling and Real Time scopes
There is no simple way to decide how much oscilloscope bandwidth you will need. Scope vendors promote a “fifth harmonic” rule of thumb. They suggest you purchase a scope with sufficient bandwidth to capture the fifth harmonic of your signals.
|
2009-02-20
|
Application Note
|
|
|
|
PDF
5.8 MB
|
Characterizing and Use of Sampling Oscilloscopes Probe and Accessories (AN 44D)
This Application Note is for information only. Agilent no longer sells or supports these products.
|
1964-02-01
|
Application Note
|
|
|
|
PDF
395 KB
|
Choosing an Oscilloscope with the Right Bandwidth for your Application
In this application note we will provide you some helpful hints on how to select an oscilloscope with the appropriate bandwidth for both your digital and analog applications.
|
2008-03-10
|
Application Note
|
|
|
|
PDF
548 KB
|
Choosing the ISI Filter Size for EZJIT Plus
EZJIT Plus is an optional jitter analysis package that runs on Infiniium real-time oscilloscopes from Agilent Technologies, Inc. and performs RJ/DJ analysis.
|
2008-09-16
|
Application Note
|
|
|
|
PDF
164 KB
|
Comparison of Different Jitter Analysis Techniques With a Precision Transmitter
This white paper describes how various jitter analysis techniques give dissimilar results. Which is right? We built a precision jitter transmitter to compare results of different techniques where test sets were exposed to known levels of jitter.
|
2006-04-06
|
Application Note
|
|
