Accessories and supplementary products for BERTs and Pulse Pattern Generators

View Data Sheet
- English | 2011-04-13 | PDF 3.07 MB

Agilent provides a wide range of accessories for high-speed signal measurements. The following assortment has been especially selected for use with 81250 ParBERT, N4900 Serial BERT Series N496x BERTs, data generators, and pulse pattern generators.

Adapter / Termination / Attenuator
Part Number	Description	Bandwidth
N4911A-002	Adapter 3.5 mm (f) to 2.4 mm (m), dc to 26.5 GHz	tt ≥ 15 ps
11901D	Adapter 2.4 mm (f) to 3.5 mm (m), dc to 26.5 GHz	tt ≥ 15 ps
15440A	Adapter 4x SMA (m) to I/O adapter	tt ≥ 1 ns
N4912A	Termination 2.4 mm (m), 50 Ω	-
1250-2206	Termination 3.5 mm (m), 50 Ω	-
8490D-003	Attenuator 2.4 mm (m) to 2.4 mm (f), 3dB, dc to 50 GHz	tt ≥ 8 ps
8490D-006	Attenuator 2.4 mm (m) to 2.4 mm (f), 6dB, dc to 50 GHz	tt ≥ 8 ps
8490D-010	Attenuator 2.4 mm (m) to 2.4 mm (f), 10dB, dc to 50 GHz	tt ≥ 8 ps
8490D-020	Attenuator 2.4 mm (m) to 2.4 mm (f), 20dB, dc to 50 GHz	tt ≥ 8 ps
8493C-003	Attenuator 3.5 mm (m) to 3.5 mm (f), 3dB, dc to 26.5 GHz	tt ≥ 15 ps
8493C-006	Attenuator 3.5 mm (m) to 3.5 mm (f), 6dB, dc to 26.5 GHz	tt ≥ 15 ps
8493C-010	Attenuator 3.5 mm (m) to 3.5 mm (f), 10dB, dc to 26.5 GHz	tt ≥ 15 ps
8493C-020	Attenuator 3.5 mm (m) to 3.5 mm (f), 20dB, dc to 26.5 GHz	tt ≥ 15 ps
8493A-003	Attenuator SMA (m) to SMA (f), 3dB, dc to 12.4 GHz	tt ≥ 30 ps
8493A-006	Attenuator SMA (m) to SMA (f), 6dB, dc to 12.4 GHz	tt ≥ 30 ps
8493A-010	Attenuator SMA (m) to SMA (f), 10dB, dc to 12.4 GHz	tt ≥ 30 ps
8493A-020	Attenuator SMA (m) to SMA (f), 20dB, dc to 12.4 GHz	tt ≥ 30 ps

Transition Time Converter
Part Number	Description
N4915A-001	47 ps, 2.4 mm (m) to 2.4 mm (f)
15435A	150 ps, 3 dB point 2.1 GHz, SMA (m) to SMA (f)
15432B	250 ps, 3 dB point 1.3 GHz, SMA (m) to SMA (f)
15433B	500 ps, 3 dB point 640 MHz, SMA (m) to SMA (f)
15434B	1000 ps, 3 dB point 370 MHz, SMA (m) to SMA (f)
15438A	2000 ps, 3 dB point 190 MHz, SMA (m) to SMA (f)

Cable kits
Part Number	Description	Bandwidth
N4915A-002	cable kit, 2.4 mm (m) to 2.4 mm (m) for Interference ports of N4903A-J20	40 GHz
N4915A-003	2.4 mm to SMA semi-rigid cable for N490x Clock OUT to Clock IN	18 GHz
N4915A-004	2.4 mm (m) to 2.4 mm (m) cable for connecting N4916A	??
N4910A	2.4 mm (m) to 2.4 mm (m) matched cable pair, ± 1.5 ps , 0.61 m	tt ≥ 15 ps
N4870A	1.85 mm (m) to 1.85 mm (m) matched cable pair, ± 1.5 ps , 0.61 m	tt ≥ 15 ps
15441A	10x SMA (m) to SCI connector	tt ≥ 500 ps
15442A	4x SMA (m) to SMA (m)	tt ≥ 100 ps
15443A	SMA (m) to SMA (m) matched cable pair, ± 25 ps , 1 m	tt ≥ 100 ps
N4871A	3.5 mm (m) to 3.5 mm (m) matched cable pair, ± 5 ps , 1 m	tt ≥ 50 ps
N4869A	3 cables with phase adjuster for ParBERT N4868A booster module	tt ≥ 50 ps
15448A	4x SMA (m) to 2x pogo adapter	??
N4915A-008	Short cable kit 2.4 mm (f) to 2.4 mm (f) for Interference ports of N4903B-J20	40 GHz
N4915A-009	Clock cable, 2.4 mm to SMA, semi-rigid cable for N4903B Clock OUT to Clock IN	18 GHz
N4915A-010	Matched cable pair for connecting N4916B; 1x 2.4mm to SMA (for data), 1x SMA-SMA (for clock, 167 ps longer)	18 GHz
N4915A-011	Matched cable kit for connecting N4876A Multiplexer with J-BERT N4903B; 2 x 2.4 mm - SMA for data, 1x SMA-SMA for clock	18 GHz
N4915A-012	Short matched cable pair for external channel addition 2.4 mm, +/- 10 ps, length 0.18 m (two pairs are needed to add differential signals)	40 GHz
N4915A-016	Cable kit for connecting N4877A CDR and demux to N4900 series BERT error detector: 1x SMA(m) to SMA (m) for clock, 1x SMA (m) to 2.4 mm (m) for data
N4915A-017	Cable kit for connecting N4877A CDR and demux to N4900 series BERT error detector: 1x SMA(m) to SMA (m) for clock to ,1x matched pair 2.4 mm (m) to 2.4 mm (m) for data from pick-of (N4915A-015) outputs to Error detector inputs

ISI channels
Part Number	Description	Bandwidth
N4915A-006	DisplayPort ISI generator	1.62 Gb/s (RBR), 2.7 Gb/s (HBR)
N4915-60001	SATA ISI channel	1.5 Gb/s, 3.0 Gb/s, 6.0 Gb/s
N4915A-014	PCIe 3.0 Calibration Channels (long and short) with internal couplers for adding sinusoidal interference	8 GT/s

Multiplexer/ Demultiplexer
Part Number	Description	Max bit rate
N4876A	Multiplexer 2:1	28.4 Gb/s
N4877A	Clock recovery and Demultiplexer 1:2	Up to 32 Gb/s
N4983A-D40	Demultiplexer 4:1	40 Gb/s
N4983A-M40	Multiplexer 4:1	40 Gb/s
N4968A	Clock and data demultiplexer	40 Gb/s

Optical reference transmitter/receiver
Part Number	Description	Bandwidth
N4917A	Optical receiver stress test set	up to 14.2 Gb/s
81490A	Reference transmitter 850 nm multimode or 1310/1550 nm single mode fiber	up to 14.2 Gb/s
81495A	Optical reference receiver, 750 nm to 1650 nm , single mode fiber	9 GHz analog bandwidth

System Amplifier
Part Number	Description	Bandwidth/bit rate
N4985A	Amplifier	Up to 50 GHz

Other
Part Number	Description	Bandwidth
N4915A-005	Serial Bus Switch	up to 6.5 Gb/s
N4916B	4-tap de-emphasis signal converter with clock multiplier (opt.001)	Up to 14.2 Gb/s (12.5 Gb/s for clk multiplier)
11997B	3x 3.5 mm (f) power splitter, dc to 26.5 GHz operation	tt ≥ 15 ps
11636B	3x 3.5 mm (f) power divider, dc to 26.5 GHz operation	tt ≥ 15 ps
11636C	3x 2.4 mm (f) power divider, dc to 50 GHz operation	50 GHz
15431A	Filter set for PCI Express 2.0 testing with 81150A	2.5 Gb/s
87406B	Matrix Switches	tt ≥ 20 ps
N4880A	Reference Clock Multiplier	19.2 MHz, 26 to 52 MHz, 100 MHz ref. clocks
N4915A-015	High-bandwidth pick-off kit for use with N4877A (mounted directly to N4877A data inputs). Consists of: 1x matched pair of pick-offs14 dB/ 2dB, 2.4 mm (m) to 3.5 mm (f) and 2.4 m (f) ,2x adapter 2.4 mm (f) to 2.4 mm (f)(m), 2x adapter 3.5mm (m) to 2.4 mm (m)	TBD
N4963A	Clock synthesizer 13.5 GHz	13 GHz
N4972A	Clock synthesizer 16 GHz	16 GHz
N4984A	Clock divider by 1/2/4/8	20/40 GHz

N4880A Reference Clock Multiplier

N4880A Reference Clock Multiplier

Accurate and simplified receiver testing for PCI Express, MIPI M-PHY and SD UHS-II

View Details
N4916B De-emphasis Signal Converter with Optional Clock Multiplier

N4916B De-emphasis Signal Converter with Optional Clock Multiplier

N4916B De-emphasis Signal Converter with Optional Clock Multiplier

View Details
N4963A Clock Synthesizer 13.5 GHz
N4963A Clock Synthesizer 13.5 GHz

500 MHz to 13.5 GHz operation

Six differential square-wave clock outputs

Controllable using the N4980A through GPIB

Programmable output parameters through GPIB

View Details
N4968A Clock and Data Demultiplexer 44 Gb/s
N4968A Clock and Data Demultiplexer 44 Gb/s

Operation from 3.5 to 44 Gb/s

Demux-by-2 or demux-by-4

Integrated phase shifter for high-speed clock and data alignment

View Details
N4972A Clock Synthesizer 16 GHz [Abgekündigt]
N4972A Clock Synthesizer 16 GHz [Abgekündigt]

0.5 to 16.0 GHz operation

Jittered, non-jittered delayed and divided outputs

Programmable patterns, large library of common stress patterns

Fully supported in N4980A software

SCPI command set for easy automation and test system integration

View Details
N4983A Multiplexer and Demultiplexer
N4983A Multiplexer and Demultiplexer

N4983A-M40 4:1 multiplexer operating from 2 to 44 Gb/s

N4983A-D40 1:4 demultiplexer operating from 2.6 to 44 Gb/s

Low power consumption

Low output jitter

View Details
N4984A Clock Divider
N4984A Clock Divider

N4984A-020 operates from 0.2 to 20 GHz

N4984A-040 operates from 0.2 to 40 GHz

Divide by 1/2/4/8 (N4984A-020)

Divide by 2/4/8 (N4984A-040)

View Details