Discontinued LCR & Impedance Meters

U1700 Handhelds for capacitance and LCR measurements. U1732B handheld LCR meter with tolerance mode, automatic dissipation and quality factor calculation capability.

U1700 Handhelds for capacitance and LCR measurements. U1732B handheld LCR meter with tolerance mode, automatic dissipation and quality factor calculation capability.

Agilent’s NEW line of handheld capacitance and LCR meters enable you to perform quick, basic LCR measurements at your convenience.

Agilent’s NEW line of handheld capacitance and LCR meters enable you to perform quick, basic LCR measurements at your convenience.

The 16048B test leads extend the measurement port with a 4 terminal-pair configuration.

The Agilent 16064B is designed to operate specifically with the Agilent 4263A/B, 4338A/B, and 4339A/B.

The 16005B is useful when measuring test devices that have large terminals.

The 16005C/D is useful when measuring test devices that have thin leads.

The 16006A is designed for press-on contact measurements such as printed board conductivity or through-hole measurements.

The 16007A/B is designed for standard Four-Terminal measurements.

The 16007A/B is designed for standard Four-Terminal measurements.

The 16143B is designed to operate specifically with the 4338A/B.

The 16043A/B enable 3-Terminal resonator SMD to be measured by using the guarding technique.

The 16043A/B enable 3-Terminal resonator SMD to be measured by using the guarding technique.

The 16085B converts a 4-terminal pair configuration into a 7mm terminal.

The 16093A test fixture is designed for impedance evaluation of axial/radial lead type devices.

The 16093B test fixture is designed for impedance evaluation of axial/radial lead type devices.

The 16094A is an accessory used for SMD components at HF/VHF.

The Agilent 16095A is designed for use with the Agilent 4192A

The 16117E is designed to operate specifically with the 4349A/B.

The Agilent 16191A test fixure is designed for impedance evaluations of side electrode SMD components.

The 16314A converts the (unbalanced) 4-Terminal pair configuration to a (balanced) binding posts configuration.

The 16315A balanced/unbalanced converter converts the (unbalanced) BNC configuration to a (balanced) binding posts configuration.

The Agilent 16316A balanced/unbalanced converter converts the (unbalanced) BNC configuration to a (balanced) binding posts configuration.

The Agilent 16317A balanced/unbalanced converter converts the (unbalanced) BNC configuration to a (balanced) binding posts configuration.

The 16338A contains four types of test leads and a mating cable, which are designed to operate with the 4338A/B.

The 4192A has been replaced by the 4294A Precision Impedance Analyzer or E5061B ENA Series Network Analyzer.

The 4194A has been replaced by the 4294A Precision Impedance Analyzer or E5061B ENA Series Network Analyzer.

The Agilent 4195A has been replaced by the Agilent E5061B ENA Series Network Analyzer.

The 4268A 120Hz/1kHz Capacitance Meter offers the best solution for production line testing of high value Multi-layer Ceramic Capacitors (MLCCs) at a constant large test signal level.

The 4278A has been replaced by the 4288A 1 kHz/1 MHz Capacitance Meter.

The 4279A 1MHz C-V Meter offers the optimum solution for increasing quality and throughput when measuring the capacitance vs bias voltage characteristics of semiconductors.

The 42841A is a bias current source for use with the 4284A or 4285A or E4980A.

The 42842A is designed for use with the 42841A.

The 42842B is designed for use with the 42841A.

The 42842C is designed for use with the 42841A.

The 42843A is designed for use with the 42841A and the 42842B, 40 A DC bias measurement configuration.

• 20 Hz to 1 MHz
• Basic Accuracy +-0.01%
• DC Bias
• Handler/Scanner Interface (Option)

• Frequency: 1 MHz to 3 GHz
• +/-1 % basic accuracy
• Wide impedance measurement range from 200 m ohm to 3 k ohm

The 4288A 1 kHz/1 MHz capacitance meter offers a high-speed with reliable measurements for capacitor testing in the production lines.

The Agilent 4291B has been replaced by the E4991A RF Impedance/Material Analyzer.

• Frequency: 1 kHz
• Low and selectable test signal current: 1uA to 10 mA
• Wide measurement range: 10u ohm to 100 k ohm
• Contact check function

• 4-channel simultaneous testing for multiple DUTs　
• 9.5ms measurement
• Fast contact checking: 2ms/point
• GPIB and Handler Interface

The 4396B provides excellent RF vector network, spectrum, and optional impedance measurements for lab and production applications.

11,000-Count Dual-Display Handheld Capacitance Meter.

The U1782A SMD tweezer is an optional accessory to make easy measuring SMD-type components.