E4418B-001 EPM Series Single-Channel Power Meter Option 001

Product Status: Currently Orderable | Currently Supported

click to collapse this panelDescription

The battery option (001) allows the E4418B power meter to be used in operating environments where there is no convenient access to an ac power source. With the battery option installed and the power meter connected to an ac power source, the meter operates from the ac source and the battery runs in a controlled charge mode.
If the meter is power-up under battery power, or if the ac power is lost while connected to an ac source, a pop-up window displays the message "Running Under Battery Power".

Battery option 001 Operational Characteristics 1

The following information describes characteristic performance based at a temperature of 25oC unless otherwise stated.

1 Characteristics describe product performance that is useful in the application of the product, but is not covered by the product warranty.

  • Typical operating time: up to 3.5 hours with LED backlight on; up to 5.5 hours with LED backlight off (E4418B power meter).
  • Charge time: 2 hours to charge fully from an empty state; 50 minutes charging enables 1 hour of operation with LED backlight on; 35 minutes charging enables 1 hour operation with LED backlight off.
    Note: The power meter is operational whilst charging.
  • Service Life: (to 70% of initial capacity at 25°C): 450 charge/discharge cycles
  • Chemistry: Nickel Metal Hydride
  • Weight: 1 kg

click to collapse this panelPrice & Availability

Availability 8 week(s)

Usually arrives in: 8 week(s)

Prices for: Malaysia | Change Country/Area

Prices are subject to change without notice.

click to collapse this panelTraining & Events

None available for this product.

click to collapse this panelRelated Links