Contact an Expert

Agilent Technologies 35670A DataLink

Agilent Technologies 35670A DataLink

35670A DataLink

Transferring data files from the Agilent 35670A to your PC has become easier than ever before with the NEW DataLink Software! DataLink is a Windows® based application that provides seamless integration between the 35670A and your PC. Now, data files on the 35670A can be transferred to the PC with ease.

The DataLink Solution enables you to:

  • Eliminate the need to transfer data files via a floppy disk
  • View and transfer data files present in your 35670A
  • Reduce access and download time

DataLink is available to order as of May 1, 2008 and will begin shipping on or before June 30, 2008.

DataLink Data Transfer Solution (35670A Option 1G0)

This no charge option available for new 35670A instruments, gives you everything you need to transfer data files from your 35670A through the USB port of your Personal Computer. Data files saved on the 35670A RAM, non-volatile RAM or floppy drive may be transferred using the DataLink solution.

In addition to the DataLink software, this option comes standard with the 82357B GPIB to USB converter. This converter connects between the GPIB interface of the 35670A to the USB interface of your PC.

DataLink Data Transfer Software Upgrade (35670U Option 1G1)

This low-cost upgrade option provides you with the software needed to transfer data files from the 35670A via the GPIB interface of your 35670A to your PC. Data files saved on the 35670A RAM, non-volatile RAM or floppy drive may be transferred to your PC using the DataLink solution.²

To use DataLink software, one of the following I/O hardware products is required:

  
  82357BGPIB to USB 2.0 converter
  82350BPCI high performance GPIB interface for the PC³
  82351APCIe™ GPIB interface³
  E5810ALAN/GPIB Gateway³

I/O libraries version 15.0, required for DataLink, are provided with each of the above products.

I/O libraries are also available free of charge at the following link: www.agilent.com/find/iolib

_________________________

1 PC operating system requirement: Windows XP SP2, Windows 2000 SP4, or Windows Vista.

2 Older 35670As may need to be upgraded with a newer firmware revision. Firmware revision A00.30 is required for instruments with A.00.xx; firmware revision A.01.11 is required for instruments with A.01.xx. To determine the firmware revision of your 35670A, press [system utility], [MORE] (F9), [S/N Version] (F7). The firmware upgrade for both revisions may be purchased from Agilent as 35670U option UE2.

3 A GPIB cable will also be required to use these hardware interfaces.

Windows is a U.S. registered trademark of Microsoft Corporation
PCIe or PCI express are trademarks or registered trademarks of PCI-SIG

In order to use the DataLink software download, your 35670A must already have instrument Basic installed. If it does not, please order 35670U option 1G1 as described above. 35670U option 1G1 includes instrument BASIC.

Release Date Version Version Description
2008-07-01 1.0.0.0 DataLink is a Windows based application that provides seamless integration between the 35670A and your PC.

How to Download

  • 1. Click the Download button. 2. Select the appropriate executable file. 3. Choose Download

How to Install

  • Select run or save to the directory of your choice.

Licensing

  • Does Not Require a License
Download

Installs on:

PC

Operating System

  • Other Windows

Prerequisites

  • See Above

Supported Instruments

  • 35670A