|
|
|
BenchLink 3为何会生成“Object reference not set to an instance of an object（对象参考没有放到对象例程）”的错误？
该错误由.NETFramework的破坏而引起。
|
2006-08-20
|
FAQ
|
|
|
|
|
BenchLink DataLogger 3为何会生成“MDAC安装失败”的错误信息？
该MDAC（微软数据库访问组件）可能被破坏，需要维修。
|
2006-08-20
|
FAQ
|
|
|
|
|
gilent 34905A和34906A双4通道RF多路复用器附带什么类型的电缆？
附带一条18英寸长，带有SMB到BNC连接器的电缆。
|
2006-12-20
|
FAQ
|
|
|
|
|
从34970A最多可直接获得多少读数？
|
2006-12-19
|
FAQ
|
|
|
|
|
使用34970A测量热电偶时，能否去除100V或更高的共模电压？
能，对于300V峰值以下的电压，可将内置数字多用表的积分时间设为1或更大的电源线周期数值。
|
2006-12-19
|
FAQ
|
|
|
|
|
借助 34970A，Excel® 能否控制扫描、进行测量并记录测量结果？
可以，可使用 3 4970A IntuiLink 插件或 Excel 宏语言来实现。
|
2005-09-16
|
FAQ
|
|
|
|
|
如何关闭34970A数据采集器上的前面板显示屏，以便以最大扫描速度进行测量？
不能使用前面板控制键直接关闭前面板显示屏，只能通过Benchlink Data Logger II软件或自行编程来远程关闭。
|
2006-12-20
|
FAQ
|
|
|
|
|
如何在BenchLink 3中将某些通道复制到其它通道？
选择需要复制的通道，右键点击并选择复制，选择被粘贴的通道，右键点击并选择粘贴。
|
2006-08-18
|
FAQ
|
|
|
|
|
如何才能保存以前在BenchLink II中所生成的数据？
|
2004-10-09
|
FAQ
|
|
|
|
|
我可以从哪里获得已停产和过时的惠普及安捷伦测试仪器的应用手册？
可以通过多种途径获得上述手册
|
2006-08-14
|
FAQ
|
|
|
|
|
34970A: Can I Assign Multiple Alarms to the Same Channel on the Agilent 34970A Modules?
You cannot assign alarm limits on a specific channel to more than one alarm number.
|
2003-11-20
|
FAQ
|
|
|
|
|
34970A: Can I buy fuses for the 34970A or 34901A from Agilent or locally?
Yes. Fuses for the 34970A or 34901A can be purchased from Agilent or an outside hardware store.
|
2004-02-05
|
FAQ
|
|
|
|
|
34970A: Can I disable the digital multimeter in the 34970A so that it can be used for switching only?
Yes it can, either using a remote command or using the front panel.
|
2004-02-02
|
FAQ
|
|
|
|
|
34970A: Can I Operate the 34970A from a DC Source?
You can use an inverter capable of providing the correct power.
|
2005-05-09
|
FAQ
|
|
|
|
|
34970A: Can I upload data using BenchLink Data Logger Software without erasing data from memory?
When the data is uploaded to the PC using BenchLink Data Logger software, all the readings are erased from the memory of the 34970A.
|
2005-05-17
|
FAQ
|
|
|
|
|
34970A: Can I use more abbreviated programming commands than are shown in the Users Manual?
The 34970A is SCPI (Standard Commands for Programmable Instruments) compatible.
|
2003-12-02
|
FAQ
|
|
|
|
|
34970A: Can the voltage measurement float on the 34901A, 34902A or 34908A modules?
If the instruments specification is not exceeded, you can float a measurement.
|
2004-02-02
|
FAQ
|
|
|
|
|
34970A: Can thermocouple measurements be set up on any channel of the 34901A/02A/08A?
Thermocouple measurements can be set up on the 34901A, 34902A, 34908A module cards.
|
2003-12-05
|
FAQ
|
|
|
|
|
34970A: Can You Use the 34908A for Thermocouple Measurements?
|
2004-03-24
|
FAQ
|
|
|
|
|
34970A: Do the 34901A and the 34902A have a common ground?
No. The 34901A and 34902A provide isolated inputs to the internal DMM.
|
2004-02-02
|
FAQ
|
|
|
|
|
34970A: Do the Modules for the 34970A need to be calibrated?
It is optional and dependent on the application the modules are being used in.
|
2006-08-29
|
FAQ
|
|
|
|
|
34970A: Does the 34970A need to be calibrated if I purchased option 001?
Since the unit 34970A with option 001 does not include the digital multimeter, no calibration is required.
|
2006-08-29
|
FAQ
|
|
|
|
|
34970A: Does the Agilent 34970A Include a Noise Limiting Filter for DC Voltage Measurements?
The DMM 34970A is designed using an integrating ADC...
|
2006-08-29
|
FAQ
|
|
|
|
|
34970A: Does the BenchLink Data Logger software come with a manual?
BenchLink Data Logger software has an extensive help menu in its application.
|
2003-11-25
|
FAQ
|
|
|
|
|
34970A: How can I improve the stability of flowmeter measurements?
Stability improvements can be made by eliminating unwanted noise.
|
2004-03-29
|
FAQ
|
|
