E1474A Six 1 x 4, 75 Ohm RF Multiplexer
|Product Status:||Discontinued | Currently Supported|
|Supported Until:||1 March 2019|
No replacement found for this product.
Key Features & Specifications
- 1-Slot, C-size, register based
- Six 1 x 4 multiplexers
- Switch signals up to 1.3 GHz
- SMB male connectors for high performance
- Controls the E1475A/E1473A RF expanders
- Tree switching for high isolation, low VSWR
The Agilent E1474A 75 ohm RF Multiplexer is a C-size, 1-slot, register-based VXI module. It is the ideal choice for video and telecommunications applications. The E1474A is functionally identical to the E1472A except for output impedance.
The RF multiplexer can be used as six multiplexers or combined with others to form a larger tree-switched multiplexer or a limited stubless matrix. You can easily and inexpensively expand the E1474A via the E1475A 75 ohm RF multiplexer expander or via the E1473A 50 ohm RF multiplexer expander.
The E1474A can easily be programmed with SCPI commands to scan multiple channels, where each channel is switched to its common, one at a time. This module is arranged as six independent banks of channels (Bank 0 through Bank 5), each acting as a 1 x 4 one-wire multiplexer. Only one channel in each bank can be connected to its common at any time. The multiplexer relays are arranged in a tree-switched configuration, providing high isolation and low VSWR. Each channel consists of a non-latching armature relay.
Training & Events
Enroll in myAgilent
A personalized view into the information most relevant to you.
Register Your Product
Register your products for service notifications, firmware update alerts, application notes and more…
Why Buy Agilent
See how the Agilent Advantage adds value to your purchase.
Learn about Keysight
Agilent’s Electronic Measurement Group is becoming Keysight Technologies.